Product category:
Electric Linear Actuators
News Release from: Inmoco | Subject: Exlar GSX and I electric linear actuators
Edited by the Engineeringtalk Editorial
Team on 08 April 2008
Actuators incorporate force sensors
The brushless servo design of the GSX series linear actuators allows them to be used in state-of-the art closed loop servo systems, where electronic control of positioning and velocity is required.
Inmoco is extending the capabilities of its Exlar GSX and I ranges of electric linear actuators, with the introduction of an integral force measuring capability; a load cell embedded within the actuator This option offers a direct method for obtaining electronic data relating to the force being applied by the actuator
This article was originally published on Engineeringtalk on 2 Mar 2001 at 8.00am (UK)
Related stories
Ultra-precise gearhead for servos and steppers
Intelligent Motion Control is extending the output torques of servo and stepper motors to class leading levels with the introduction of the new Ultratrue 22 from Thomson Micron.
Servo actuators have better dynamic response
The hollow shaft design of Inmoco's new Bautz servo linear actuators reduces weight significantly, providing improved dynamic response and enabling travel velocities up to 500mm/s to be achieved.
Moreover, the packaging the of the load cell delivers a compact, protected robust design, with the strain gauge load sensors embedded within the actuator housing.
The integrated load cell option is available on Exlar's GSX30, 40 and 50 models and the I series 30 and 40 model actuators.
The load cell is a strain gauge type, offering stable and accurate load sensing (+/- 1% linearity, +/- 0.5% repeatability and hysteresis, 1% nominal) in both tension and compression directions and for static or dynamic loads.
The force measuring option is provided as a package, which includes a separate fitting for connecting the internal load sensor to an external strain conditioner/amplifier, required to excite the strain gauge sensor.
In addition, Exlar offers a rugged strain gauge conditioner to provide a high-level signal, either 0-10V or 4-20mA output, for monitoring of the output signal, which, importantly, is compatible with standard gauge monitors and PLC strain gauge input cards.
Any one of numerous conditioners/amplifiers on the market can be used.
The GSX and I series actuators both employ Exlar's roller screw technology.
The GSX actuators also benefit from Exlar's T-LAM technology, a new, segmented lamination stator design that enables 35% more continuous motor torque to be provided from the same frame sizes, with no cost premium.
The brushless servo design of the GSX series linear actuators allows them to be used in state-of-the art closed loop servo systems, where electronic control of positioning and velocity is required.
The robustness, precision and reliability of the GSX and I series actuators mean that they are suitable for use in many demanding applications including fastening and joining riveting, bag sealing, thermoforming, injection moulding, precision pressing, clamping, tension control, welding, tube bending, wire winding, dispensing, testing and filling. Request a free brochure from Inmoco ...
• Inmoco: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
