Visit the Eriks UK web site
Click on the advert above to visit the company web site

Product category: Control Valves (Rotary, Mixing, Temperature Control etc)
News Release from: Intertronics | Subject: I and J2601-107
Edited by the Engineeringtalk Editorial Team on 30 August 2002

Tanks feed dispensers

Request your FREE weekly copy of the Engineeringtalk email newsletter. News about Control Valves (Rotary, Mixing, Temperature Control etc) and more every issue. Click here for details.

The I and J Fisnar I and J2601-107 is one of a wide range of fluid reservoir tanks available from Intertronics.

The I and J Fisnar I and J2601-107 is one of a wide range of fluid reservoir tanks available from Intertronics The reservoirs are used to feed bulk fluids to valves or dispensing pens

The I and J2601-107 is a top-ported reservoir ideal for low to medium material viscosities.

Its convenient 4.5 litre capacity makes it ideal for bench mounting close to the dispensing operation.

The reservoir's 'open top' lid assists in placing bottles or jars inside it, avoiding contact with the material and potential contamination by air if fluid is poured directly into the chamber.

An internal fluid hose enters the material to extract the fluid when the reservoir is pressurised.

The system includes a pressure regulator/gauge, and is also supplied with a 3m fluid hose and 6mm airline.

A variety of different reservoir sizes and types is also available, including bottom porting and top porting units.

Intertronics: contact details and other news
Email this article to a colleague
Register for the free Engineeringtalk email newsletter
Engineeringtalk Home Page

Search the Pro-Talk network of sites

Visit the Dichtomatik web site
Visit the Eriks UK web site