Product category:
Industrial Drives/Controls
News Release from: Invertek Drives | Subject: 11kW Optidrive E2
Edited by the Engineeringtalk Editorial
Team on 07 May 2008
Industrial drive offers 30-second setup
Fast and accurate repeat drive programming is possible by simply inserting the Optistick into the RJ485 slot on the face of the Optidrive E2.
The Optidrive E2 is available in three frame sizes, with power outputs now ranging from 0.37 to 11kW, up from the previous maximum of 7.5kW The 11kW Optidrive E2 unit is provided with an IP20 rating only and features a three phase input, 380 to 480V +/- 10%
All other drives in the Optidrive E2 range offer the option of IP20 or IP55 ratings.
Invertek claims that anyone can get the Optidrive E2 up and running in under 30 seconds.
The 11kW unit outputs 24A and handles an ambient temperature of up to 50C.
The optional Optistick flash memory stick allows fast and accurate repeat drive programming by simply inserting the Optistick into the RJ485 slot on the face of the Optidrive E2.
The Optistick has upload/download buttons to allow fast copying of parameters between drives.
An infra-red communications capability provides remote control convenience.
• Invertek Drives: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
