Product category:
Connectors, Terminals, Busbars and Slip Rings
News Release from: In2Connect | Subject: Types DIN43650 and M8/M12
Edited by the Engineeringtalk Editorial
Team on 08 March 2005
Industrial connectors at competitive
prices
In2Connect Electronic Components has added high-quality, high-reliability and highly competitive industrial connector types DIN43650 and M8/M12 to its range.
In2Connect Electronic Components has added high-quality, high-reliability and highly competitive industrial connector types DIN43650 and M8/M12 to its range The DIN43650 solenoid connectors comprise a range of conveniently packaged connectors for use with pneumatic and hydraulic valves in process control applications - used with pressure switches, level sensors, motors, limit switches etc The range includes industry standard, two- and three-contact types, panel and cable mounting options, vibration-proof gasket-sealed screwlock connectors, and IP65 sealable versions in Forms A, B and C
This article was originally published on Engineeringtalk on 1 Aug 2005 at 8.00am (UK)
Related stories
Decentralised cabling supports factory standards
Available for the first time in the UK from In2Connect is the range of cables produced in Italy by GCE Cavi Elettrici.
Power distribution system gets new surge arrester
A new surge arrester offers protection against the massive, transient overvoltages believed to be responsible for over 30 per cent of all damage to electronic equipment.
Keep tabs on blown fuses in motor controls
The new OFM electronic fuse monitor has been developed by ABB Control to provide increased safety and faster repairs for three-phase motor control centres
The three styles - Form A, Form B and Form C - have 18, 10 and 8mm contact separations, respectively.
Form B is commonly referred to as a "micro" connector, and Form C is often referred to as a "submicro".
Their black, grey or transparent body mouldings are suitable for ambient temperatures from -40 to +125C, and the screw type snap-inserted, silver plated contacts are rated at 10A.
Right-angled cable-mount models are available, with rewirable or overmoulded cable options to order in PVC and polyurethane.
Uniquely there is a double gasket for Form A enabling the same connector to be used for both PG9 and PG11 cables.
Sockets are available with inbuilt electronic components in a host of protection circuit configurations, incorporating LED indicators, varistors, diodes for overvoltage protection, rectifiers etc NDT connectors may also be customised according to customer specifications.
The M8 and M12 screw locking connectors comply with IEC60947-5-2.
This range of circular connectors is designed for use in the machine tool, industrial electronics and test and measurement industries.
They are often used with proximity sensors of all types in industrial process control.
Rewirable or moulded-on-cable, miniature screwlock connectors for panel and cable-end (straight or right angled) application are all available with three, four or five (M12) contacts.
As with the DIN43650 types, sockets are available with LED indicators.
• In2Connect: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
