Product category:
Stepper and Servo Drives, Motors, Controls
News Release from: Interinar Electronics | Subject: BSD-02
Edited by the Engineeringtalk Editorial
Team on 20 June 2006
Microstepping driver is easy to control
The BSD-02 module is a complete single-axis microstepping driver suitable for driving bipolar and unipolar step motors from 50mA to 2.5A and up to 30V.
The BSD-02 module is a complete single-axis microstepping driver suitable for driving bipolar and unipolar step motors from 50mA to 2.5A and up to 30V The drive requires only a single power supply, and can operate in one of the four stepping modes - full-, half-, quarter- or eighth-step - with no phase-sequence tables, high frequency control lines or complex interfaces to program
The module is ideal for applications where a complex microcontroller is unavailable or overburdened.
Easy to use step/direction inputs require simple TTL signals, and the module can be connected directly to a microcontroller or PC if common safety guidance are followed.
The driver can be easily adjusted to virtually any motor up to 2.5A by adjusting an onboard potentiometer.
It may be used to drive bipolar as well as unipolar motors - both six- and eight-wire types - but will not drive five-wire motors.
• Interinar Electronics: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
