Product category:
Fasteners, threaded and non-threaded
News Release from: James Walker Rotabolt | Subject: RotaBolt 2 tension control system
Edited by the Engineeringtalk Editorial
Team on 07 August 2007
Tension control fasteners improve
offshore safety
RotaBolt 2 tension control fastener system was selected because it provides a range of tension control on installation, tightening and in-service checking.
RotaBolt tension control fasteners have been chosen for new open water lubricator valves (OWLV), being used on offshore drilling rigs as a safety testing device in open water riser systems The new valves have been manufactured by Expro, and are being used in a deep water oil and gas field application, off Port Harcourt, Nigeria
This article was originally published on Engineeringtalk on 22 Nov 2005 at 8.00am (UK)
Related stories
Safety bolt gives visible warning of joint failure
The Vision is billed as the world's first safety bolt to give a clear indication - visible up to 25m away - of loss of tension across a bolted joint.
Safety fastener lets go when it has to
The BreakBolt is a novel safety fastener that is designed to deliberately fail at a predetermined tension level.
The OWLV is a relatively recent development and is used as an integral part of an open water riser system during the installation and work-over of subsea Xmas Trees.
It typically sits 50-200m below the rig floor and allows the introduction and external pressure testing of the down-hole tooling string, ensuring that all the elements function correctly and can withstand well-bore pressure prior to installation.
"This is the first time we have used RotaBolt technology", commented Design Engineer Chris Cusack from Expro.
"We have been very pleased with it and found that the installation and tooling times were considerably reduced".
"The tension control assurance delivered by RotaBolt gave us an added comfort factor - we knew we could be confident about the pre-load on the joints".
"We had tried traditional torque techniques before, but found them unpredictable".
"The client also liked the fact that in-service maintenance and bolt pre-load checking was made easy".
The RotaBolt 2 system was selected because it provides an even greater range of tension control on installation, tightening and in-service checking.
It offers two tension settings in a single sensor and features a dual-load indicator cap - the outer cap for high tension setting and inner cap for low tension - giving the choice of an operational tension range for overload or maintenance control.
The OWLV also allows testing of the riser string and surface well control equipment above it, and provides an additional safety barrier between the sub-sea wellhead and the drilling rig.
Each OWLV is approximately 3353mm long, has an external diameter of 950mm and a through bore of up to 187mm.
Ten RotaBolt 2 fasteners are fitted to the flanges at each end of the OWLV. Request a free brochure from James Walker Rotabolt ...
• James Walker Rotabolt: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
