Product category:
Data loggers
News Release from: JDL (Just Data Loggers) | Subject: ACR data loggers
Edited by the Engineeringtalk Editorial
Team on 04 April 2005
Loggers add confidence to recordings
Battery-operated palm-sized data loggers from ACR in Canada allow reliable monitoring of relative humidity and temperature conditions with confidence over a long period of time.
Battery-operated palm-sized data loggers from ACR in Canada answer requirements for reliable monitoring of relative humidity and temperature conditions with confidence over a long period of time The first requirement is relative humidity accuracy and temperature sensing
This article was originally published on Engineeringtalk on 25 Jan 2006 at 8.00am (UK)
Related stories
Software increases data logger communications
Software lets users edit information from all ACR data loggers that have communicated with the PC on which it is installed.
Small data loggers now available in Europe
The Veriteq range of small data loggers is now available in Europe from JDL, and there will be a constant release of additional products that until recently have been only readily available in the USA
Accurate Monitoring of Pasteurisation Process
One simple and easy way to monitor the pasteurisation process is to use the PUM's data logger available from JDL.
For the cost conscious the TRH-1000 8bit device is a simple RH and temperature logger with an accuracy of +/-4% for 20-80% RH and with a memory of 32Kbyte, this is supplied with its own software and simply plugs into the COM port of a PC.
The SR-2 8bit +/-4% (10-90% RH) with 32Kbyte memory range of devices is normally adequate although an SRP-2 12bit +/-3% (10-90% RH) with an 128Kbyte memory device is also available for those more demanding requirements.
The second major requirement is the software, this must be intuitive, easy to install and use.
TrendReader for SR series and TrendReader Plus for SRP series software is just that.
Yet it is extremely powerful, offering very simple and easy facilities with the Plus version having a wide range of add on options.
Sample rates can easily be set up from a few seconds to a few hours between readings.
This sample rate will obviously affect capacity of logger readings, fast sampling will fill up the memory faster than slower readings.
The software allows the user to either recycle on a first in first out basis or stop when full.
The relative humidity sensors used in the SR and SRP series are relatively immune to chemical contamination but when exposed to certain contaminants and or extreme conditions, accuracy degradation could result.
The data loggers therefore have exchangeable sensors that can readily be plugged into the logger and easily have the calibration installed.
They also have the option feature of installing remote RH and Temperature sensor assemblies The TRH-1000 just has the two channels and the sensors are not replaceable.
• JDL (Just Data Loggers): contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
