Product category:
Process Hardware (Pipes, Nozzles, Heaters, etc)
News Release from: Jiskoot | Subject: Fast Loop LPG sampling system
Edited by the Engineeringtalk Editorial
Team on 22 July 2003
LPG sampling system meets offshore
requirements
A Jiskoot Fast Loop LPG sampling system chosen for installation with a new metering system at Algeria's Ohanet offshore production facility incorporated a variety of special requirements.
A Jiskoot Fast Loop LPG sampling system chosen for installation with a new metering system at Algeria's Ohanet offshore production facility incorporated a variety of special application design requirements, including the system's ability to be fully isolated from the main line for ease of maintenance Extracting and storing multiple 1cm3 grabs of LPG from the process pipeline to provide representative samples for laboratory analysis, the system is a self-contained electrohydraulic design due to the lack of site air, only needing electrics and control signals
This article was originally published on Engineeringtalk on 7 Nov 2007 at 8.00am (UK)
Related stories
Blender controller enters distributed control mix
Three-term PID controller provides a cost-effective yet powerful and flexible solution for two-stream controlled rate or "wildstream" blending and analyser trim applications.
Gas sampling system suits demanding applications
Jiskoot's four-stream gas sampling system includes a human machine interface panel and a Profibus remote I/O module to minimise field cabling requirements.
The sampling system uses a pumped fast or bypass loop taken off the line from which the sample is taken utilising a Jiskoot Cell Sampler pump.
Samples are stored in new Jiskoot CPC constant pressure receivers pre-charged with nitrogen to maintain them at line pressure so that gaseous elements are not lost.
Pressure gauges are provided on the filter inlet and outlet and on the pump discharge to indicate when filter cleaning is needed.
A flow indicator/switch provides a low flow output and can flag an alarm on the sample controller or halt the sampling operation, ensuring the elimination of non-representative sampling.
Providing ISO3171 sampling compliance, the system also incorporates a manual sample point taking full line pressure samples directly off the bypass loop via a monoflange.
The GRP sampler cabinet contains a heater giving frost protection.
• Jiskoot: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
