Product category:
Stepper and Servo Drives, Motors, Controls
News Release from: JVL Industri Elektronik | Subject: SMC75
Edited by the Engineeringtalk Editorial
Team on 16 April 2008
Step motor controller allows simple
interfacing
The SMC75 PCB can be built into a separate instrument or mounted directly on the back of the motor
JVL has released a step motor controller with RS485 and CANbus serial interface Eight I/Os can be configured as inputs, outputs, or analogue inputs that can be controlled via a nanoPLC and MacTalk graphic programming
This article was originally published on Engineeringtalk on 13 Aug 2003 at 8.00am (UK)
Related stories
AC servomotor reaches new levels of intelligence
Described as a completely new concept in motor control, the MAC motor is an AC servomotor and controller combined in a single unit, offering previously unseen low pricing for the OEM market.
The 57 x 57mm PCB contains everything required to solve a modern control task, either as a stand-alone controller or controlled from a PLC or PC via serial commands or IO.
Modbus RTU and CANopen allow easy and fast connection to a PLC.
An ActiveX/OCX driver is available for simple interfacing to LabView, Excel, VB or other Windows programs.
The SMC75 uses the same protocol as the MAC motors and can therefore be connected to the same RS485 bus system.
The PCB can be built into a separate instrument or mounted directly on the back of the motor, providing a cost-effective solution.
Alternatively it can be delivered by JVL in a box with cables or M12 connectors, for mounting in a bottom plate or DIN rails.
• JVL Industri Elektronik: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
