Product category:
Lubricants
News Release from: Kluber Lubrication GB | Subject: Kluberfluid C-F3 to 8 Ultra series
Edited by the Engineeringtalk Editorial
Team on 16 June 2004
Online tool sells lubricant benefits
The adhesive lubricants in the Kluberfluid C-F3 to 8 Ultra series make the handling of large open girth gear drives a clean affair.
The adhesive lubricants in the Kluberfluid C-F3 to 8 Ultra series make the handling of large open girth gear drives a clean affair: these special lubricants are free from graphite and allow tooth flank inspection while the drive is running Lower consumption quantities promise to reduce maintenance and disposal costs, facilitate cleaning and reduce the need for keeping extensive stocks
This article was originally published on Engineeringtalk on 10 Apr 2008 at 8.00am (UK)
Related stories
Lubricant change cuts energy use by 17.3%
By converting over to the NSF H1 registered Klubersynth UH1 6-220 the brewery meets its food grade compliance policy and oil drain intervals can be extended to at least five years.
Now engineers can compare the graphite-free Kluberfluid C-F3 Ultra with graphite-containing adhesive lubricants using an interactive online calculator on the Kluber website.
Kluber has developed this calculator on the basis of many years of experience in the lubrication of large girth gear dives.
The parameters flank width, drive type, lubricant and operating hours are taken into account.
Then users can enter a lubricant price per kilogram to see the effect a particular lubricant has on their budget when seen over a whole year. Request a free brochure from Kluber Lubrication GB ...
• Kluber Lubrication GB: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
