Lightweight welder can go anywhere

The Minarc 151 is a new 110V lightweight, MMA/scratch start TIG inverter welding machine.

The Minarc 151 is a new 110V lightweight, MMA/scratch start TIG inverter welding machine.

Designed using new mould tooling to produce an ergonomic casing to house the 110V power source, the Minarc 151 can be used from mains power and most importantly from power generators using up to 50m long power supply cables, making it ideal for professional repair and maintenance work, agricultural and horticultural applications or anywhere where welding has to be carried out on-site at sea or on land.

Minarc 151 has been designed for use with all electrode types from 1.5 to 3.25mm diameter and for maximum output from a 6.6kVA power, although it will operate perfectly well from a 2.2kVA supply, and has been tested at this power rating using 3.25mm diameter electrodes.

It delivers 140A welding current at 35% duty cycle and 100A at 100% duty cycle with excellent arc ignition and stability.

For TIG welding 150A welding current is delivered at 35% duty cycle and 110A at 100% duty cycle.

Kemppi's ICS isolated cooling system allows this machine to be used in extreme conditions.

The ICS allows the cooling air flow only over the primary components of the machine from back to front and not over the vital electronic components which are shielded from dust and dirt particles, and the impact resistant casings makes Minarc 151 very robust.

Light weight - only 4.4kg with an easy grip handle and carry strap - gives Minarc 151 "weld anywhere" versatility.

The unit is CE marked and protected against ingress to IP23C.

Back to top