Product category:
Plant- and Machine-Wide Communications
News Release from: Korenix Technology | Subject: Jetnet 3005f
Edited by the Engineeringtalk Editorial
Team on 06 March 2006
Fibre port added to Ethernet rail switch
Five-port entry-level Ethernet rail switch has either one multimode fibre port or one single-mode fibre port, and complies with all relevant standards.
Korenix has introduced the Jetnet 3005f industrial five-port entry-level Ethernet rail switch with one fibre port This is as an extended model of the Jetnet 3000 series of industrial entry-level Ethernet rail switches
This article was originally published on Engineeringtalk on 18 Jul 2007 at 8.00am (UK)
Related stories
Industrial managed switches offer high speed
The recovery time of a Gigabit fibre ring or a fast Ethernet copper ring connected in JetNet 5010G can reach to less than 5ms.
Switches and convertors handle strenuous tests
The JetNet 5010G/3010G/4508/2005 and JetCon 1301 provide 1200V AC port to port isolation protection to protect the operator from electrical shock.
There are two versions - 3005f-m five-port switch with one multimode fibre port and 3005f-s with one single-mode fibre port.
The 3005f complies with all relevant standards.
With the 3000 series, Korenix provided entry-level switches that could be used where low-cost network components were needed for a star or line structure.
The 3005f has four 10/100baseTx ports with auto MDI and MDIX function, and one 100baseFx single or multimode port, allowing it to be used in environments subject to strong electromagnetic fields.
The 3000 units can be mounted on Din rails or walls, and are quick and easy to put into operation using the plug-and-work principle.
To cope with harsh industrial environments, the 3005f comes with a robust one piece-formed aluminium case, which complies with IP30.
The terminal block and ventilation holes on the bottom of each unit can reduce the chance of damage due to dust and moisture ingress.
The case measures 31 by 135 by 105mm (width by height by depth), letting it be easily installed in distribution boxes.
Device and network status information is indicated by LEDs on the front panel.
Redundant DC power inputs ensure that the operation will not be interrupted due to power instability.
The two other models in the series are the 3005 and 3008 Ethernet switches with five and eight 10/100baseTx ports.
• Korenix Technology: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
