Product category:
Flowmeters and Flow Sensors
News Release from: Krohne | Subject: DK 37 range
Edited by the Engineeringtalk Editorial
Team on 30 August 2005
More options for variable area
flowmeters
The DK 37 range of variable area flowmeters are now available with a rugged, all metal construction and with either an analogue or digital display.
Krohne has enhanced its DK 37 range of variable area flowmeters The miniature instruments are now available with a rugged, all metal construction and with either an analogue or digital display
This article was originally published on Engineeringtalk on 8 Oct 2007 at 8.00am (UK)
Related stories
Level sensor monitors naphthalene
Naphthalene has a very low di-electric constant of around 2.2 at 100C, which makes it particularly difficult to measure.
Flowmeter improves wax production
The wax flowing through the flowmeter can vary in density from 0.8 to 1.0kg/litre and in viscosity from 5.5 to 1200cP.
The DK 37 M8M and M8E are especially suited for applications where indicating the instantaneous flow value of liquids, gases and vapours is required.
The instruments are suitable for a broad range of applications, especially where reliable measurement is needed to be taken in harsh environments.
The DK 37 M8M model provides an analogue indication of flow rate, while the DK 37 M8E has a digital display.
This model is equipped with an all-new electronic signal convertor (ESK), which has been completely re-designed to provide higher measurement accuracy through improved resolution of its analogue-to-digital convertor.
The M8E model is Hart compatible, with a linear current two-wire circuit output between 4 and 20mA, which enables it to measure reliably ultralow flow rates.
A three-wire circuit output of 0-20mA is also available.
The flowmeter is equipped with a flow totaliser which can be configured through the user interface.
Recalibration can also be carried out for new operating conditions via its software and without the need for dismantling the instrument.
The flowmeters operate on the float measuring principle, with flow from bottom to top, and are fitted with a fine adjustment valve so precise setting of specific flow value can be easily set.
The instruments are manufactured from corrosion resistant metal and fitted with standard 0.25in NPT connections.
• Krohne: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
