Product category:
Temperature sensors
News Release from: Labfacility | Subject: L60Plus welder
Edited by the Engineeringtalk Editorial
Team on 21 July 2000
Precision welder ideal for thermocouple
junctions
The new, L60Plus welder from Labfacility is a compact, simple-to-use instrument designed for thermocouple and fine wire welding.
The new, L60Plus welder from Labfacility is a compact, simple-to-use instrument designed for thermocouple and fine wire welding It is primarily designed for use by sensor manufacturers to produce commercial grade thermocouple junctions; it is ideal for producing large numbers of exposed junction thermocouples for test and development laboratories
This article was originally published on Engineeringtalk on 21 Jul 2000 at 8.00am (UK)
Related stories
Cables: the vital link in thermocouples
The Labfacility range of thermocouple connectors and cables is designed to provide optimum accuracy in the vital link between the sensor and instrumentation.
The L60Plus is ideally suited to transducer and RTD extension lead attachment and also for use in jewellery production and repair; it also makes for convenient attachment of wires to metal surfaces.
Use of the welder does not require special skills and most operatives will be capable of producing quality work with little practice.
The instrument is supplied with a full range of user accessories including a footswitch for convenient operation.
Suitable for use with wires of up to 1.1mm diameter, an argon gas shield facility is included.
A satisfactory thermocouple junction is produced without the need for argon; where argon is available, a momentary purge is automatically triggered immediately prior to the weld discharge to give the optimum weld integrity.
The output energy can be varied up to 60 Joules.
• Labfacility: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
