Product category:
Electric Linear Actuators
News Release from: Lambda Photometrics | Subject: PI OEM Piezo Actuators
Edited by the Engineeringtalk Editorial
Team on 03 February 2000
Piezo actuators keep it simple
Piezo actuator experts Physik Instrumente are now able to offer a wide range of both low and high voltage piezo stacks appropriate for equipment builders and system designers.
Piezo actuator experts Physik Instrumente are now able to offer a wide range of both low and high voltage piezo stacks appropriate for equipment builders and system designers The actuators eliminate many of the options not normally required in OEM type applications
This article was originally published on Engineeringtalk on 25 Feb 2000 at 8.00am (UK)
Related stories
Infrared Imaging : The best gets better
Viewing infrared wavelengths between 0.4-1.5microns, the converted image produced by the new 7215 is now brighter and offers edge to edge sharpness.
The piezo stacks are offered either with or without a protective casing and with pigtail lead connections.
Keeping the actuators simple in design provides the following advantages: - small dimensions - low prices - fast delivery If preloading or special mounts are required these can be designed by the end user.
Alternatively preloaded piezo actuators and casing designs with threaded mounts are available from our extensive product range.
Like our standard piezo actuator designs the OEM stacks feature sub-nanometer resolution, sub-millisecond response time, absence of stiction / friction and long operating lifetime.
Low voltage (-20 to +120V) OEM models are available with displacements from 2 to 60 microns and a load capacity from 100 to 3000 N.
High voltage versions are available in almost any shape and offer a load capacity of up to 30 000N. Request a free brochure from Lambda Photometrics ...
• Lambda Photometrics: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page


