Synrad CO2 laser welds polyethylene film
A
Laser Lines (Industrial and Medical) product story
Edited by the Engineeringtalk editorial team
May 12, 2009
Synrad's sealed CO2 lasers are used in a variety of industrial processes including cutting, welding, drilling and marking.
Because CO2 lasers have very consistent output power and the heating process is always non-contact, laser-formed seals will remain consistent over hours of operation.
For this particular application, which required sealing 0.05mm-thick polyethylene film, a Synrad 50W laser was used in conjunction with an XY table and a cutting head outfitted with a 63.5mm focal length lens.
This lens typically provides a 0.1mm focused spot size; however, for laser sealing operations, a larger spot size is often preferred.
A larger spot size yields lower overall power density and leads to increased melting and less vaporisation of thin films.
It also increases the weld line width, providing better weld strength.
For these reasons, the lens was unfocused slightly by increasing the standoff distance to around 5mm between the surface of the film and the tip of the cutting head, to obtain a 0.5mm-wide weld line on the plastic film.
The cutting head traversed two layers of the film at a speed of 12.7m/min to produce the final finished seal.
The resulting seal is consistent in strength across its entire length.
Not what you're looking for? Search the site.
Contact Laser Lines (Industrial and Medical)
Tel +44 1295 672500
Other Laser Lines (Industrial and Medical) stories
-
Synrad CO2 lasers mark medical products
Synrad CO2 lasers provide a permanent means of identifying products without the use of hazardous inks, chemicals, or other consumables. -
Nylon gears increase service life and reduce noise
Nylon gears from Laser Lines are commonly used in many automotive, electronic and medical applications, as well as in various industrial machines. -
Subcontractor invests in Promaster laser system
Laser Lines has completed its first UK installation of an Optec Promaster laser system at Laser Micromachining of St Asaph, North Wales. -
Laser Lines offers welding with reduced distortion
Laser Lines is offering laser welding with reduced thermal distortion compared with conventional welding, accurate control of heat input and the ability to direct the beam precisely to the weld point. -
Laser Lines offers range of labels
Laser Lines has introduced a range of laser-marking and kiss-cutting labels for faceplates, bar-coded inventory tags, custom signage and piping labels.
Browse by category
-
Capital Equipment (3,533)
- Capital Equipment (1)
- Compressors and Air Treatment (546)
- Electrical hardware (131)
- Electronics Manufacturing, Tools, Instruments (192)
- Machinery and Production Equipment (1,133)
- Manufacturing Machinery and Plant Equipment (478)
- Production line blowers and fans (74)
- Robotics, Handling and Storage (978)
- Consultancy and Services (927)
-
Control and Instrumentation (5,142)
- Cabling, Conduit, Signal Conditioning (818)
- CNC and Motion Controllers (190)
- Control and Instrumentation (3)
- HMIs/Operator Interfaces (297)
- Logic Controllers, Timers and Relays (96)
- Mid-range and Large PLCs (204)
- Plant- and Machine-Wide Communications (1,210)
- Plantwide control (1,354)
- Power Supplies, Uninterruptible Power (577)
- Smaller-Sized PLCs (393)
-
Drives, Motors and Controls (3,450)
- Drives, Motors and Controls (2)
- Industrial Drives/Controls (1,293)
- Industrial Motors (502)
- Linear Drives and Motors (121)
- Precision Motors and Gears (434)
- Stepper and Servo Drives, Motors, Controls (1,096)
-
Electrical and Electronic Equipment Design (4,327)
- Batteries, chargers and circuit protection (588)
- Connectors, Terminals, Busbars, Slip Rings (724)
- Electrical and Electronic Components (652)
- Electrical and Electronic Equipment Design (4)
- Electrical and Electronic Subassemblies (377)
- Enclosures and Equipment Cooling Fans (722)
- Knobs, Handles and Enclosure Hardware (430)
- PCs and Embedded Systems (830)
-
Engineering Design Software (6,388)
- 2D CAD software (203)
- 3D CAD software (1,199)
- CAM, CNC, production management software (583)
- Data, document management software (324)
- Electrical design software (168)
- Engineering Design Software (17)
- FEA and structural analysis software (377)
- File conversion software, data capture (358)
- Fluid, thermal, noise, vibration software (340)
- Materials design and moulding design software (153)
- Maths, charting, statistics, QA software (325)
- PLM and collaboration software (665)
- Process, instrumentation, automation software (269)
- Publishing and documentation software (234)
- Rendering, visualisation, styling software (208)
- Simulation, modelling, validation software (965)
-
Engineering Industry News, Resources (6,199)
- Electronic Resources for Engineers (273)
- Engineering Business News, Views (388)
- Engineering Conferences (438)
- Engineering Education, Resources, Standards (851)
- Engineering Exhibitions, Events (578)
- Engineering Guides, Newsletters (354)
- Engineering Industry Developments, Awards (635)
- Engineering Industry News, Resources (4)
- Engineering Industry Reports, Surveys (597)
- Engineering Recruitment, Employment (219)
- Engineering Seminars (421)
- Engineering Training Courses (458)
- Health and Safety Consultancy, Software (180)
- Health and Safety Events, Training, News (285)
- Health and Safety Legislation (403)
- Health and Safety Strategy, Risk Assessment (115)
- Machine Building (4,633)
-
Materials and Processing (3,041)
- Materials and components (2,272)
- Materials and Processing (5)
- Materials processing and testing (292)
- Rapid Prototyping (472)
-
Monitoring, Measurement and Quality (5,681)
- Data Acquisition Hardware and PC I/O Boards (491)
- Data acquisition Software and Communications (505)
- Data loggers (428)
- Electrical and Electronic Testing, PAT Equipment (645)
- Form/co-ordinate, optical, vision instruments (766)
- Gauges, Indicators and Instruments (449)
- Materials testing equipment (439)
- Monitoring, Measurement and Quality (1)
- Telecomms/network test equipment, software etc (159)
- Testing and Calibration Services and Information (522)
- Testing, analysing and monitoring equipment (1,276)
-
Powertrain Design (3,723)
- Bearings (986)
- Chains and belts (334)
- Gears, brakes, couplings and engines (1,482)
- Hydraulic Components (475)
- Lubricants (441)
- Powertrain Design (4)
-
Sensors (7,319)
- Accelerometers and Vibration Sensors (450)
- Barcode Sensors (103)
- Flowmeters and Flow Sensors (650)
- Gas, Chemical, Radiation, Magnetic Sensors (294)
- Humidity and Environmental Sensors (158)
- Level Sensors and Leak Detectors (539)
- Linear Position Sensors (417)
- Loadcells, Force Sensors, Torque Sensors (732)
- Pressure sensors (643)
- Proximity Sensors (715)
- Rotary Position, Tilt and Angular Sensors (565)
- Sensors (12)
- Temperature sensors (624)
- Vision and Colour Sensors (1,417)
- Small Mechanical Components, Joining, Tools (2,057)
- Valves, Pumps, Process Hardware (3,732)
