Product category:
Loadcells, Force Sensors and Torque Sensors
News Release from: Lebow Products | Subject: Model 6736 Series torque wrench checker
Edited by the Engineeringtalk Editorial
Team on 28 January 2003
Checker provides calibration for torque
wrenches
The Model 6736 Series torque wrench checker is ideal for use in the fastening market, but can also be used in R and D, process control, quality assurance, calibration or even OEM situations.
The Model 6736 Series torque wrench checker is ideal for use in the fastening market, but can also be used in R and D, process control, quality assurance, calibration or even OEM situations These highly accurate units measure static torque in both the clockwise or anticlockwise direction
This article was originally published on Engineeringtalk on 27 May 2002 at 8.00am (UK)
Related stories
Units measure static torque both ways
According to Lebow Products, its new Model 2133 series reaction torque line is well suited for use in fastening market.
They can be used as a reference standard for most torque wrench styles such as click action, break back, or dial indicator.
The Lebow Model 6736 series covers torque ranges from 50 to 1000ftlb in five different rated capacities and drive sizes.
Devices are compatible with most strain gage signal conditioner/readouts.
Each unit is fully temperature compensated from 70 to 170F with a useable temperature range from -65 to +200F.
They feature an overall accuracy rating of better then +/- 0.25% of rated output with sensitivity output of 2mV/V nominal.
The bridge resistance is 350ohm with an insulation resistance of over 5Gohm.
All sensors are dead weight calibrated with standards traceable to the NIST.
All units have a safe overload protection rating of 150% with an ultimate overload of 200%.
• Lebow Products: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
