Product category:
Electronics Manufacturing, Tools and Instruments
News Release from: LEM UK | Subject: AK/DK AKR/DKR transducers
Edited by the Engineeringtalk Editorial
Team on 03 September 2002
Easy installation for current
transducers
LEM has new families of current transducers with an innovative design that dramatically reduces installation time.
LEM has new families of current transducers with an innovative design that dramatically reduces installation time By uniquely combining a current sensor and a transducer suitable for direct PLC interface in a single package, installation time is reduced by 50%
This article was originally published on Engineeringtalk on 17 Oct 2002 at 8.00am (UK)
Related stories
Current transducers for milliamp accuracy
The DF series of current transducers provides accurate measurement of low DC currents from 10 to 500mA without breaking the primary cable.
The design's clamp-on function allows mounting on site without splitting conductors, reducing the number of actions (no disconnection of the cable) and therefore reducing installation time still further and increasing safety.
The new product families are available for AC (AK and AKR series) and DC (DK series) from 2 to 500A.
The power supply can be self-powered with a 0-5 or 0-10V output, or loop powered with a 4-20mA output or a +24V DC output for the DC current version.
The AKR family uses a true RMS algorithm, which integrates the actual waveform over time, making it suitable for use in systems with nonlinear loads or "noisy" power environments.
The averaging technique used by the AK family is suitable for strictly linear loads.
These new transducers are well adapted for retrofit applications in existing installations.
• LEM UK: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
