Product category:
Form/co-ordinate, optical and vision instrumentation
News Release from: Leuze Mayser | Subject: AMS 200
Edited by the Engineeringtalk Editorial
Team on 16 November 2006
Distance measurement has long range
accuracy
Novel distance measurement device boasts an accuracy of +/-3mm over the full measuring distance of 200m.
The AMS 200 is the latest distance measurement device from Leuze Mayser, and through the use of laser technology a hitherto unattainable accuracy of +/-3mm is achieved over the full measuring distance of 200m Optical distance measurement based on the light propagation principle using red light laser is a tried-and-tested method for permanent position sensing of moving plant and machine parts such as rack handling systems, portal crane gantries, travelling trolleys or transfer bridges
This article was originally published on Engineeringtalk on 18 Jan 2002 at 8.00am (UK)
Related stories
Fast wireless data transfer around a site
A new industrial optical data transmission system will operate over distances up to 200m and supports Profibus, Interbus and, soon, DeviceNet and FIP Modbus
Readers make sense of 2D barcodes
To complement and extend the functionality of its extensive range of barcode readers and vision systems Leuze Mayser has added a series of two-dimensional code readers.
Introduction of the new AMS 200 (Absolute Measuring System 200) sets new higher standards as regards positioning control, data transparency, handling and design, bringing improved repeatability and accuracy over longer distances.
The technology that makes the AMS 200 such a precision piece of engineering is contained in a modern housing design that contributes to easier installation, whether new or retrofit.
Much is attributed to the front-mounted display panel which shows actual measuring values, set parameters or warning messages.
And directly alongside the display are four menu selection buttons for greater convenience during initial setup procedures including precise alignment.
Connectivity is also directly up-front with the AMS 200, the M12 sockets clearly visible for easy access, and only to be expected from a leading edge distance measurement device is supports for various bus interfaces.
Leuze Mayser distance measurement devices have been helping control the precise position of cranes and machinery for many years.
The AMS 200 joins a fully proven range but has the edge when it comes to a need for greater precision over longer distances. Request a free brochure from Leuze Mayser ...
• Leuze Mayser: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
