Counter-reverse unit increases transport speed
An increase in travel speed and useful loading can be achieved with the versatile timing belt counter-reverse unit now available in the Item range of equipment
An increase in travel speed and useful loading can be achieved with the versatile timing belt counter-reverse unit now available in the Item range of equipment.
Called unit 8 80 R50 II, the equipment is designed for use with 50mm wide drive belt as used on the line 8 range of profile system.
The higher strength of this steel reinforced belting enables much heavier loads to be transported or supported on a vertical axis than was previously possible.
The counter-reverse unit and drive mechanism is mounted on to a fixed carriage assembly, rather than at the end of the linear axis provided by a profile section.
With the complete unit and motor then integrated into the profile construction as a static item, it permits the timing belt to operate as a rack, with the axis profile itself being driven.
In a typical gantry system 'Z' axis, the motor no longer has to lift its' own weight and that of pulleys, leaving more effective power available for moving heavier loads.
The length of travel is limited only by the length of profile utilised, and the arrangement can be used for placement, positioning and load transfer in a wide range of production oriented projects.
The timing belt counter-reverse unit is housed in a black anodised aluminium enclosure incorporating ball bearing rollers.
The length of timing belt captive within the unit is 2 x 202mm.
Not what you're looking for? Search the site.
Tel +44 1773 749330
-
MBS adds 'Positioning Set 8 40' to Item kit
Machine Building Systems has added the 'Positioning Set 8 40', a screw-actuated positioning set, to its Item aluminium profile system. -
Machine Building Systems offers monitor adapters
A backing plate for securing flat screens to any Item Line-8 aluminium profile frame has been added to the Item aluminium profile machine construction kit. -
MBS offers T-Slot Slider from Item
Item has added the T-Slot Slider to its Line-8 aluminium machine kit system, available from Machine Building Systems (MBS). -
Bracket suits 80mm base-diameter M16 knuckle feet
Item has introduced a bracket that accommodates a central M16 threaded-hole to suit any M16 knuckle foot with an 80mm base diameter. -
Machine Building Systems offers Item ESD fasteners
Machine Building Systems is offering Item ESD standard fastening sets for the Line 5 20x20 module, the Line 6 30x30 module and the Line 8 40x40 module.
Browse by category
-
Capital Equipment (3,518)
- Capital Equipment (1)
- Compressors and Air Treatment (539)
- Electrical hardware (131)
- Electronics Manufacturing, Tools, Instruments (192)
- Machinery and Production Equipment (1,132)
- Manufacturing Machinery and Plant Equipment (475)
- Production line blowers and fans (74)
- Robotics, Handling and Storage (974)
- Consultancy and Services (922)
-
Control and Instrumentation (5,128)
- Cabling, Conduit, Signal Conditioning (817)
- CNC and Motion Controllers (190)
- Control and Instrumentation (3)
- HMIs/Operator Interfaces (296)
- Logic Controllers, Timers and Relays (96)
- Mid-range and Large PLCs (203)
- Plant- and Machine-Wide Communications (1,203)
- Plantwide control (1,353)
- Power Supplies, Uninterruptible Power (575)
- Smaller-Sized PLCs (392)
-
Drives, Motors and Controls (3,437)
- Drives, Motors and Controls (2)
- Industrial Drives/Controls (1,290)
- Industrial Motors (502)
- Linear Drives and Motors (121)
- Precision Motors and Gears (430)
- Stepper and Servo Drives, Motors, Controls (1,090)
-
Electrical and Electronic Equipment Design (4,307)
- Batteries, chargers and circuit protection (583)
- Connectors, Terminals, Busbars, Slip Rings (717)
- Electrical and Electronic Components (649)
- Electrical and Electronic Equipment Design (3)
- Electrical and Electronic Subassemblies (375)
- Enclosures and Equipment Cooling Fans (722)
- Knobs, Handles and Enclosure Hardware (430)
- PCs and Embedded Systems (828)
-
Engineering Design Software (6,368)
- 2D CAD software (203)
- 3D CAD software (1,194)
- CAM, CNC, production management software (583)
- Data, document management software (322)
- Electrical design software (167)
- Engineering Design Software (17)
- FEA and structural analysis software (377)
- File conversion software, data capture (358)
- Fluid, thermal, noise, vibration software (339)
- Materials design and moulding design software (152)
- Maths, charting, statistics, QA software (325)
- PLM and collaboration software (664)
- Process, instrumentation, automation software (269)
- Publishing and documentation software (234)
- Rendering, visualisation, styling software (206)
- Simulation, modelling, validation software (958)
-
Engineering Industry News, Resources (6,212)
- Electronic Resources for Engineers (278)
- Engineering Business News, Views (388)
- Engineering Conferences (438)
- Engineering Education, Resources, Standards (850)
- Engineering Exhibitions, Events (577)
- Engineering Guides, Newsletters (366)
- Engineering Industry Developments, Awards (636)
- Engineering Industry News, Resources (4)
- Engineering Industry Reports, Surveys (597)
- Engineering Recruitment, Employment (219)
- Engineering Seminars (418)
- Engineering Training Courses (458)
- Health and Safety Consultancy, Software (180)
- Health and Safety Events, Training, News (285)
- Health and Safety Legislation (403)
- Health and Safety Strategy, Risk Assessment (115)
- Machine Building (4,621)
-
Materials and Processing (3,035)
- Materials and components (2,267)
- Materials and Processing (5)
- Materials processing and testing (292)
- Rapid Prototyping (471)
-
Monitoring, Measurement and Quality (5,653)
- Data Acquisition Hardware and PC I/O Boards (490)
- Data acquisition Software and Communications (505)
- Data loggers (425)
- Electrical and Electronic Testing, PAT Equipment (643)
- Form/co-ordinate, optical, vision instruments (762)
- Gauges, Indicators and Instruments (449)
- Materials testing equipment (431)
- Monitoring, Measurement and Quality (1)
- Telecomms/network test equipment, software etc (158)
- Testing and Calibration Services and Information (520)
- Testing, analysing and monitoring equipment (1,269)
-
Powertrain Design (3,712)
- Bearings (983)
- Chains and belts (333)
- Gears, brakes, couplings and engines (1,476)
- Hydraulic Components (475)
- Lubricants (441)
- Powertrain Design (3)
-
Sensors (7,286)
- Accelerometers and Vibration Sensors (449)
- Barcode Sensors (103)
- Flowmeters and Flow Sensors (644)
- Gas, Chemical, Radiation, Magnetic Sensors (290)
- Humidity and Environmental Sensors (158)
- Level Sensors and Leak Detectors (538)
- Linear Position Sensors (415)
- Loadcells, Force Sensors, Torque Sensors (729)
- Pressure sensors (640)
- Proximity Sensors (713)
- Rotary Position, Tilt and Angular Sensors (563)
- Sensors (11)
- Temperature sensors (622)
- Vision and Colour Sensors (1,411)
- Small Mechanical Components, Joining, Tools (2,043)
- Valves, Pumps, Process Hardware (3,725)

