Click on the advert above to visit the company web site

Product category: Rapid Prototyping
News Release from: MTT Technologies Group | Subject: TR4/04 vacuum casting system
Edited by the Engineeringtalk Editorial Team on 09 February 2001

Bigger prototytpe parts from vacuum
casting system

A new vacuum casting system with increased resin capacity has been introduced to facilitate the production of bulky or thick wall section plastic prototypes.

A new vacuum casting system with increased resin capacity has been introduced to facilitate the production of bulky or thick wall section plastic prototypes The new TR4/04 machine, developed by MCP Equipment, uses two mixing robots to deliver 11kg of resin to a casting chamber of 750mm x 900mm x 750mm

This represents twice the casting capacity than previously available using a similar sized chamber, and will particularly benefit designers looking to increase section volumes on TV or computer housings, automotive parts, small domestic appliances and toys.

Vacuum casting remains the leading process for creating plastic prototype parts in as little as 24 hours - particularly those with highly complex geometry.

Accurate, flawless castings can be produced using a range of MCP's casting resins which replicate the properties and appearance of a huge variety of end materials.

Cost comparisons with conventional prototyping production methods also prove that overall savings of more than 95% can be achieved by vacuum casting.

The easily manoeuvrable TR4/04 is part of a range of easy to use Vacuum Casting Systems available from MCP Equipment.

Each incorporates PLC software control systems with touch screen operation to help users cut cycle times and eliminate human error. Request a free brochure from MTT Technologies Group ...

• MTT Technologies Group: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page

Search the Pro-Talk network of sites