Product category:
Rapid Prototyping
News Release from: MCP Tooling Technologies | Subject: Vacuum casting
Edited by the Engineeringtalk Editorial
Team on 23 November 2001
Vacuum casting proves ideal for robot
casing
Vacuum casting resins achieved the speed of turnaround plus the translucent properties required to build the prototype models of Cybot, a new build-up robot available via a fortnightly magazine
Vacuum casting resins from MCP Equipment achieved the speed of turnaround plus the translucent properties required to build the prototype models of Cybot, the new build-up robot available via a fortnightly magazine With a brief to design an easy to assemble but stylish casing which would accommodate Cybot's electronics, Bristol based Amalgam, initially vacuum cast a selection of first generation models of their designs from hand built masters
This article was originally published on Engineeringtalk on 9 Feb 2001 at 8.00am (UK)
Related stories
Bigger prototytpe parts from vacuum casting system
A new vacuum casting system with increased resin capacity has been introduced to facilitate the production of bulky or thick wall section plastic prototypes.
MCP extends vac casting resin range
MCP Equipment has introduced three new resins to its range of vacuum casting plastics for the creation of high quality, complex prototypes in as little as 24 hours
After the injection moulders had refined the final design, an SLA model was produced from the Pro E CAD file and used as a pattern for the 30 or so vacuum cast prototypes.
These were used for pre-launch PR and market research whilst the metal tooling was being produced.
Amalgam's Prototyping Manager, Mike Harvey, explains, "By using vacuum casting to produce the prototypes, we were able to offer the client the speed of turnaround they wanted and something which for all intents and purposes had the looks and functionality of the production item.
Further reading
Resins take the heat under the bonnet
New vacuum casting resins with excellent HDT properties plus the ability to pigment resins to match all pantone or RAL colours are now available from MCP Equipment.
Vacuum casting system for flexible prototypes
For the first time, a technology exists which allows the successful vacuum casting of thin walled parts from highly viscous, thick or thixothropic LIM and LSR materials.
The beauty of vacuum casting is that once you have a silicone mould of the final part design, you can produce prototypes in a variety of colours and in materials with a variety of properties.
We changed the colour of Cybot's final casing four or five times." MCP's Bob Bennett continues, "There is only so much you can do with CAD before you really have to start making functional parts for evaluation by your target audience." Focus group trials revealed that Cybot had a tendency to topple over due to the weight of its rubber front bumper - a factor not recognised from the initial CAD design.
The bumper design was therefore modified and recast using a lighter "ABS" fender with a smaller "rubber" bump strip.
Prototypes of Cybot's body shell, chassis and battery box were cast in MCP SG95, a clear PU resin which replicates the properties of ABS, has a shore hardness of 82D and can be easily pigmented to produce a variety of translucent colours.
The bump strips and wheels were cast in MCP 8145, a rubber like PU resin with high tear strength, good elongation properties and a shore hardness of 45A.
Simulating production thermoplastics, glass and rubber, MCP's Vacuum Casting Resins offer a wide range of properties including UV stability, high impact and temperature resistance.
MCP's Vacuum Casting Process is used worldwide for prototyping products as diverse as ventilation grills for the Porsche Boxter and Hozelock garden sprinklers.
Amalgam has recently used the technology to develop parts for the Dyson Washing Machine and for other hi-tech clients in the marine, geological and aerospace industries.
Following the production of a silicone tool, castings are available in a matter of hours - cost effective, finished prototypes can be ready in days and can be evaluated and modified quickly prior to the commissioning of hard tooling. Request a free brochure from MCP Tooling Technologies ...
• MCP Tooling Technologies: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
