Product category:
Precision Motors and Gears
News Release from: Midwest Motion Products | Subject: MMP-S28-150C-24V GP81-014
Edited by the Engineeringtalk Editorial
Team on 31 October 2005
Robust gear motor runs from 24V supply
Midwest Motion Products has released a new DC gear motor, the Model MMP-S28-150C-24V GP81-014.
Midwest Motion Products has released a new DC gear motor, the Model MMP-S28-150C-24V GP81-014 Accepting any 24V DC source, including battery power, this robust gear motor has a maximum diameter of just 81mm and is 216mm long, and has a keyed output shaft of 19mm diameter by 40mm long
This article was originally published on Engineeringtalk on 14 Aug 2002 at 8.00am (UK)
Related stories
Tight speed regulation for novel servo design
The Model M815-BR servo drive is a novel unique velocity loop encoder feedback device.
Easy mounting is accomplished with four "face mount" M6 threaded holes, equally spaced on a 65mm diameter BC.
The output of the gear motor is rated for 8.5Nm continuous torque, at 250rev/min, and 90.0Nm peak.
Despite its compact size and weight, the motor is an efficient design, requiring just 13.4A at 24V DC to generate its full load output torque.
Optional 12, 36 and 48V windings are available.
This unique design is rated at an IP54 protection level for operation in harsh environments.
Samples are available from stock for rapid prototyping needs.
A rear shaft extension to accommodate an encoder is offered standard on this product.
Typical options available with this servomotor include integral optical encoders, failsafe brakes, analogue tachometers, and planetary gearheads, with standard ratios ranging from 3:1 to 450:1, with standard or low backlash precision gearing available.
• Midwest Motion Products: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
