Product category:
Precision Motors and Gears
News Release from: Midwest Motion Products | Subject: MMP-TM55-24V GP52-100 DC gear motor
Edited by the Engineeringtalk Editorial
Team on 08 February 2006
DC gear motor works from batteries
DC gear motor accepts any 24V DC source, including battery power, and measures 54.4mm in diameter by 197mm long, with a keyed output shaft of 12mm diameter by 25mm long.
Midwest Motion Products has released the MMP-TM55-24V GP52-100 DC gear motor Accepting any 24V DC source, including battery power, this motor measures 54.4mm in diameter by 197mm long, and has a keyed output shaft of 12mm diameter by 25mm long
Mounting is accomplished with four face-mount M5 threaded holes, equally spaced on a 40mm diameter BC.
The output is rated for 11.3Nm continuous torque, at 46rev/min, and 56Nm peak.
It requires 3.6A at 24V DC to generate its full load output torque.
Optional 12 and 36V windings are available.
The design is rated at IP54 protection level for operation in harsh environments.
Options include servo motors with integral optical encoders, failsafe brakes, analogue tachometers and planetary gear heads, with standard ratios from 3:1 to 450:1, and standard or low backlash precision gearing.
• Midwest Motion Products: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
