Product category:
Lubricants
News Release from: Master Chemical Europe | Subject: Trim E805
Edited by the Engineeringtalk Editorial
Team on 01 October 2004
Universal soluble oil boasts high
stability
High chemical and mechanical lubricity, minimal maintenance and a formulation suited to the most demanding of fluid management systems are the distinguishing characteristics of Trim E805.
High chemical and mechanical lubricity, minimal maintenance and a formulation suited to the most demanding of fluid management systems are the distinguishing characteristics of Master Chemical's new high quality, universal soluble oil, Trim E805 The stability of this latest addition to the Trim range makes it the perfect choice for consistent parts manufacture
This article was originally published on Engineeringtalk on 23 Dec 2005 at 8.00am (UK)
Related stories
Aero engine manufacturer approves new fluid
Within weeks of its release, Master Chemical Europe's new Trim E805 cutting and grinding fluid had received full approval by a UK-based aero engine manufacturer.
Big advantages to minimal lubrication
Minimal lubrication fluids are designed to be mixed and dispersed through a stream of compressed air and the resultant mist applied externally or through-the-tool.
Its qualities have already earned it the approval of one of the world's leading aero-engine OEMs.
As well as a long operational life, it is also formulated for both grinding and machining.
In high-speed turning and milling, Trim E805 has the perfect balance of cooling and lubrication qualities to provide superior tool life and surface finish.
Further reading
Fluid is a clear winner in medical production
Trim C270 was introduced by Master Chemical to operate where high coolant velocities and volumes are needed to achieve maximum productivity.
Washing compound produces no foam
Even when contaminated with coolant residues, the latest addition to the Trim Clean range of washing compounds produces no foam at high pressure/volumes.
During trials, one manufacturer was able to increase the surface quality on its aluminium tail rotor supports significantly by switching to Trim E805 as well as greatly extending sump life.
Tool life was an issue at another trial site - a manufacturer of aero-engine turbine and compressor blades.
In this trial Trim E805 was installed in a Bridgeport VMC1000, a machining centre responsible for the heaviest duty cutting.
Although previous coolants had made little contribution to reducing the excessive and expensive tool wear, the new Trim fluid concentrate made - and continues to make - a big difference.
Trim E805 has been designed to protect machine the tool surfaces while also preventing sticky ways; the coolant is easily removed with water, working solution or aqueous cleaners.
Extremely hard water tolerant, this new emulsion has a fine particle size that reduces carry-off and facilitates the fluid's delivery to the cutting point.
Trim E805 is compatible with aluminium, steel alloys, cast iron and yellow metals and is easy recycled.
As expected from a new addition to the Master Chemical coolant family, Trim E805 does not need costly and hazardous additives such as phenol to maintain its long life.
Its non-chlorinated and nonsulphurised formulation controls build-up even in the toughest of operations.
This was confirmed by a manufacturer of aluminium profiles who was experiencing residue problems with its existing coolant.
Trim E805 was put to the test in a CNC machining centre, employed to roll tap M3 aluminium profiles.
Not only did Trim E805 keep the machine clean with no residue problems common to the previous coolant, it was also used at just 10% concentration.
The old coolant did not even deliver this performance at 15% so thanks to Trim E805, this company improved quality and reduced costs.
• Master Chemical Europe: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
