Product category:
Lubricants
News Release from: Master Chemical Europe | Subject: Trim E708
Edited by the Engineeringtalk Editorial
Team on 22 June 2006
Fluid has universal appeal
Trim E708 is billed as the ideal universal fluid for multimetal job shops.
Master Chemical has extended its European Chip 3 classification family of cutting and grinding fluid concentrates The addition is Trim E708 whose consistent performance belies its low cost
This article was originally published on Engineeringtalk on 27 Oct 2003 at 8.00am (UK)
Related stories
Big advantages to minimal lubrication
Minimal lubrication fluids are designed to be mixed and dispersed through a stream of compressed air and the resultant mist applied externally or through-the-tool.
It is low-foaming and extremely hard water tolerant.
Also as this a very effective biocidal package, it promises an exceptionally long sump life.
This Trim product is the ideal universal fluid for multimetal job shops.
It can be used to machine a wide range of ferrous, nonferrous and nonmetallic materials.
In common with other additions to the Master Chemical fluid range, Trim E708 is classified as nonhazardous in accordance with Chip 3 regulations.
It contains no nitrites, secondary amines or phenolics.
Neither does the formula contain sulphur or chlorine as an EP additive.
Naturally, Trim E708 is formulated for recycling.
Good tramp oil separation is assured without significant change in emulsion characteristics.
• Master Chemical Europe: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
