Product category:
Mid-range and Large PLCs
News Release from: Mitsubishi Electric Automation Systems | Subject: Q series PLC
Edited by the Engineeringtalk Editorial
Team on 28 July 2005
PLC upgrade provides a larger slice of
cake
Upgrading the PLCs at a Manchester manufacturer of bread improvers has increased total plant production capacity by 60%, allowing it to add an additional range of cake mixes to its product lines.
A Manchester manufacturer of bread improvers has increased total plant production capacity by 60% by adding an additional range of cake mixes to its product lines The Bakemark (UK) plant was already producing 17,500 tonnes of bread improver per annum, but can now handle an additional 10,000 tonnes of cake mix as well
This article was originally published on Engineeringtalk on 6 Jun 2007 at 8.00am (UK)
Related stories
Remote diagnostics help ships offload cargo
Unloading sand and gravel collected offshore for building materials is demanding work that usually has to be completed to a tight timetable.
Free fieldbus module with PLC purchases
Until the 30th March 2003, anyone who purchases a new Mitsubishi Q series PLC system will receive a free CC-link Fieldbus module.
The system performs mixing and batching processes, drawing its raw materials from 16 silos each capable of holding between 10 and 50 tonnes of raw material.
The weighing has to be exact, the mixing thorough, batch changeovers clean, and plant utilisation high.
On top of this there are rigorous requirements for hygiene, quality and traceability.
Development and installation of the new control system was undertaken by Advanced Technical Software (ATS), which worked on the original system installed around 10 years ago.
The old system was based on Mitsubishi PLCs.
Further reading
PLC designed for the "heart" of machine control
Mitsubishi describes its new Q Series PLC as the control platform that users would expect from a specialist automation manufacturer that has a deep understanding of the automation industry.
21st century systems produce classic pottery
Mitsubishi Electric automation systems help maintain the delicate balance of traditional quality and contemporary productivity at Denby Pottery.
Touchscreen HMI takes charge of big fan
An innovative fan design coupled with an equally innovative control system enables MegaFan's 7.3m HVLS (high volume low speed) fans to replace as many as 25 conventional fans.
An A3A model was used as a master and six smaller A1S units provided emergency back up facilities.
Although this system has served the plant well ATS realised that it would not have the facilities to cope with the increased production nor the flexibility to encompass the new cake mix lines.
A site inspection showed that the existing plant cabling, panels and input/output devices were still in excellent condition and were retained intact.
The Mitsubishi A3A was upgraded to a Q series PLC, which although able to offer like-for-like facilities to the A3A also benefits from massively more processing power and capabilities.
A further Q series PLC was added to control the new equipment and was connected on the plantwide Ethernet network.
Although the existing system software was completely redesigned, ATS was able to reduce the programming time by using Mitsubishi's GX IEC Developer software.
The IEC61131-3 certified software allows a library of standard program blocks to be developed and deployed multiple times within the application.
As the plant runs on a continuous three-shift pattern ATS realised that a high integrity control system was needed in order to avoid potentially costly stoppages, and that reliability of the main server was crucial.
Therefore redundancy was built in by fitting dual power supplies and memory, plus additional hard disc drives installed as two raid arrays.
Likewise the simple serial communications were upgraded to Ethernet for high-speed two-way data transfer and to provide a distributed systems architecture instead of the centralised structure used beforehand.
This increases the redundancy within the system to an even higher level and thus reduces the possibilities of breakdowns even further.
During the planning stage it was decided that the distributed system architecture should divide the control operations into two distinct areas, administration and plant control.
Each production line has its own PC which runs a local Scada program developed by ATS from a standard Citect package.
A facility is also provided so that any of the PCs can be switched to control any of the other lines.
For the central control functions, ATS developed bespoke software for controlling the raw material movements from the storage hoppers to the mixing lines.
One of the most sophisticated routines in the programme is the weighing algorithm, which not only takes the input from precision scales but also makes precise allowances for the amount of material "in flight" along the screw augers and pneumatic conveyors between each individual silo and mixer and adjusts them automatically after every batch.
It also provides recipe management, materials tracking and admin and enterprise information collation.
In addition to high levels of plant control and production flexibility, the system ATS has designed and commissioned provides Bakemark with high levels of reporting and product tracing.
For materials already used in production the reports allow backwards tracing from an individual product batch code.
Finally, A diagnostics and alarm function is operated centrally and ATS made a point of ensuring that this is so straightforward that it can be used by even the most inexperienced operator.
Before bringing the new control system online ATS ran exhaustive tests on a plant simulation programme called Trial Run it has developed in-house.
It was also used to train all operators prior to installation, and as a result change over from the old control system to the new was achieved in less than 48 hours. Request a free brochure from Mitsubishi Electric Automation Systems ...
• Mitsubishi Electric Automation Systems: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
