Product category:
Precision Motors and Gears
News Release from: Micromech
Edited by the Engineeringtalk Editorial
Team on 18 September 2001
Micromech gears up with DC motor range
Micromech is appointed UK distributor of the Tsukasa range of DC geared motors, offering power ratings of 0.4 to 25W and torques from 3mNm up to 1000mNm
High quality and hard wearing these motor/gearboxes are most suitable for small mechanisms that demand a rugged, long life product in service machines or human interface equipment Because the range is so wide and also there is such a comprehensive selection of options, they can be used in a host of different applications - ATMs, ticketing machines, coin hoppers, CTV, cassette loading, vending machines, to name just a few
This article was originally published on Engineeringtalk on 26 Feb 2001 at 8.00am (UK)
Related stories
From mains power to motion control in three steps
Stepper Systems just can't get any simpler now, according to Micromech, as the motion and control specialists have introduced socket to stepping with only three components
The motors have power ratings of 0.4 to 25 watts and torques from 3mNm up to 1000mNm, with a speed range of 3rpm to 1100rpm.
Low cost linear actuator assemblies for some motors are available, as well as simple 3ppr or 5ppr encoders can be supplied fitted to motors.
The gearboxes are available in ratios from 3.7:1 to 1000:1, with plastic or metal gears, in standard or heavy-duty spur gear versions, and also there is the compact even heavier duty planetary gear arrangement.
Intended for the medium to volume user, samples and pre-production units may be ordered, and additionally custom-made product in the TG brushed DC motor range can be manufactured to customer specification.
• Micromech: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
