Click on the advert above to visit the company web site

Product category: CNC and Motion Controllers
News Release from: Micromech | Subject: Isel CNCmachine
Edited by the Engineeringtalk Editorial Team on 06 November 2007

CNC machines bring down carving costs

The Isel machine is designed for production routing and drilling on a wide variety of materials including wood, plastic, MDF, solid surfacing materials and nonferrous metals.

An inexpensive computerised numerical control (CNC) machine has helped start a new production woodworking business The company produces complicated architectural ornamentation that was up till then mostly made by skilled craftsmen working with power tools

There is a substantial market niche for producing decorative woodcarvings faster, cheaper and at higher levels of accuracy.

Low-cost CNC machines can accurately duplicate a computer aided design program in much less time than someone working by hand.

Although clearly a skilled job, making complicated pieces such as carved mouldings and friezes is a very slow process by hand.

The first piece is typically assigned to a very experienced and highly paid craftsman, who cuts it out with hand and power tools, then less experienced workers typically duplicate the piece using a tracer.

One problem with this approach is that even the most skilled woodworker has difficulty accurately producing three-dimensional contours.

The result is a piece that requires extensive finishing by hand, to chisel and sand the piece the way a customer wants it finished.

The beauty of a CNC machine is that every detail of the piece can be defined to absolute perfection in the CAD/CAM software and allowing time for the operator to do something else while the machine produces the part.

While the CNC machine isn't perfect, the accuracy of the machines is far beyond what can be achieved by hand.

However, every piece made will be just as good as the first one such that each piece coming off will need little hand finishing.

While programming is a labour-intensive process similar to cutting out the first piece by hand, once it is completed other pieces can be produced without constant attention.

All that is required is a person loading raw wood and unloading finished pieces on the machine and occasionally checking to be sure the tool hasn't worn out or broken.

The result is that architectural ornamentation can be produced at a much more competitive price on CNC machines.

The Isel machine is designed for production routing and drilling on a wide variety of materials including wood, plastic, MDF, solid surfacing materials and nonferrous metals.

It is very flexible and easy to use, and is adaptable to nearly any woodworking problem.

For example, long pieces of moulding can be stacked side by side while the spindle traverses each piece to cut the pattern.

Another piece introduced is called a corbel, a triangular decorative bracket that fits in the corner between a ceiling and wall.

The machine takes a solid block of wood and whittles it down to an intricate 3D design on three sides.

These multisided pieces are mounted on a rotary table that moves the appropriate face towards the spindle one after another.

The Isel machine's shaft and bearing system produces very smooth, play-free motion and is an extremely rigid system that produces high-quality cuts.

It uses anti-backlash ball screws that have excellent power transmission due to the rolling ball contact between the nut and screws.

This type of contact ensures low friction, low wear and long life.

The ball screws also make it possible to produce wooden parts to the machine resolution of 0.013mm.

Instead of being ball screw-driven, there are less expensive machines using rack and pinion gearing which have too much play to make accurate cuts in small areas.

Also this type of gearing wears out quickly in the dusty environment of a carpentry shop.

The Isel machine uses servomotors to control the cutting motion, while other machines often use stepper motors, which can give a stair-step cutting effect.

With this set-up the company can produce just about anything that customers requires.

One customer asked for a moulding that looks like a grapevine with the grapes protruding in 3D.

From a picture of what was wanted, the image was scanned and then turned into a 3D model.

The artwork is coloured by the use of brushes and flood fill tools and each colour is assigned to an individual 3D profile.

The different types of profiles that can be generated include plane, round and angular.

The parameters of these profiles are controlled by defining the basic shape, start height, limit height and wall angle, giving almost total control over a wide range of 3D effects.

The programme builds 3D reliefs by assigning a height to each pixel in the 2D image.

Then by providing their own artistic interpretation and designing the moulding in such a way that it can be machined quickly, a sample piece in MDF is given to the customer.

From the feedback the programme is modified so that the finished pieces are exactly what is wanted.

• Micromech: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page

Search the Pro-Talk network of sites

Put your news on Engineeringtalk  |   Advertise  |   Get the free Engineeringtalk newsletter  |   Engineeringtalk Home
About Engineeringtalk  |   Copyright © 2000-2008 Pro-Talk Ltd, UK