Visit the Parker Hannifin Electromechanical Automation web site
Click on the advert above to visit the company web site

Product category: Stepper and Servo Drives, Motors, Controls
News Release from: Micromech | Subject: Aries drives
Edited by the Engineeringtalk Editorial Team on 15 January 2008

Servo drives incorporate Ethernet
communications

Request your FREE weekly copy of the Engineeringtalk email newsletter. News about Stepper and Servo Drives, Motors, Controls and more every issue. Click here for details.

The Aries drives offer the added benefits of auto-tuning, drive set-up and full real-time diagnostics, all via the Ethernet PowerLink network

Parker EMD has added Ethernet PowerLink communications to its digital brushless servo drives, available from Micromech The Aries drive platform uses Ethernet PowerLink technology to increase system performance while decreasing overall system costs and installation time

System design and machine installation times are greatly reduced through the use of inexpensive and readily available Ethernet cabling for the interface between the servo drive and the motion controller.

This useful configuration removes the need for traditional and expensive to produce +/-10V analogue control and feedback cables.

The elimination of such cables, which are often the source of problems during the commissioning process, has the added benefit of increasing the reliability and noise immunity of the whole control system.

The drive operates in interpolated position mode, receiving co-ordinated position set-point commands over the Ethernet PowerLink network from a master motion controller.

When using the ACR9030/9040 family of motion controllers, the Aries drives offer the added benefits of auto-tuning, drive set-up and full real-time diagnostics, all via the Ethernet PowerLink network using the ACR-View front-end software.

Available with continuous power ratings of 400W, 750W and 1.3kW these drives operate direct online from a 120-240V AC single-phase supply and also feature a logic keep-alive facility.

Both rotary and linear brushless servomotor technologies are supported, as are both standard quadrature- and EnDat-encoder feedback systems.

Ethernet PowerLink is a high-speed digital motion-bus network which enables the easy interconnection of PLC's, motion controllers, drives and I/O products from a variety of automation vendors.

By using standard, well proven industrial Ethernet network hardware the Ethernet PowerLink combines a mix of polling and time-slicing mechanisms to provide a real-time, deterministic communications channel via a reliable, low cost and easy to install hardware platform.

The Ethernet PowerLink is an open standard.

Parker Hannifin is just one of a number of manufacturers who are members of the Ethernet PowerLink Standardisation Group.

This multivendor support for the Ethernet PowerLink standard ensures that a wide range of automation products are available for integration into Ethernet PowerLink-based automation systems.

Micromech: contact details and other news
Email this article to a colleague
Register for the free Engineeringtalk email newsletter
Engineeringtalk Home Page

Search the Pro-Talk network of sites

Visit the Parker Hannifin Electromechanical Automation web site