Click on the advert above to visit the company web site

Product category: Humidity and Environmental Sensors
News Release from: Michell Instruments | Subject: S3000 dewpoint monitor
Edited by the Engineeringtalk Editorial Team on 14 November 2001

Instrument takes to the air in pollution
project

A Michell Instruments dewpoint monitor is being used to verify the water vapour levels in order to gauge the boundary level of the aerosol and trace gases in the atmosphere, in a UK scientific project

Technology from Michell Instruments is playing a major role in the UK URGENT scientific project run by the University of Manchester (UMIST), called Pollution of the Urban Midlands Atmosphere or PUMA The Project, using a Michell Instruments S3000 dewpoint monitor to verify the water vapour levels in order to gauge the boundary level of the aerosol and trace gases in the atmosphere is funded by the Natural Environment Research Centre (NERC)

The project measures pollutant on the ground but also in the vertical, checking for traces of ozone, carbon dioxide and oxides of nitrogen.

Over the past eight months 16 flights have taken place in a specially adapted Cessna light aircraft.

The flights have been extended to the city of Manchester and there are now plans to investigate the fate of anthropogenic aerosols downwind of the city of Edinburgh as part of another URGENT project called SASUA organised by the Centre for Ecology and Hydrology.

The rear two seats of the aircraft have been removed to make way for an extensive equipment pannier and the Michell Instruments S3000 which is permanently fixed inside the aircraft.

The dewpoint monitor was installed in the 1980's.

Dr Martin Gallagher runs the project and is highly delighted with Michell Instruments contribution to the research.

"The monitor is highly reliable and plays a vital role in our work and measurements.

Although this particular device has served us well, we hope to upgrade to the latest Dewmet in order to make use of the automated features offered by the latest version.

This will be possible using funds recently obtained from the UK NERC UWERN Joint Infrastructure Fund." Based on proven cooled mirror technology, the new Michell Instruments Dewmet range is capable of operating at temperatures ranging from -40C to +90C, in a dewpoint range of -50C to +85C.

The instruments feature zero drift, giving highly accurate measurements of +/-0.2C dewpoint and +/-0.1C gas temperature.

In addition, response time is fast, at 1C per second.

All Dewmet cooled mirror dewpoint meters feature Michell Instruments' unique automatic balance compensation system (ABC), to ensure optimum performance in contaminated environments.

The system operates periodically to drive condensation off the mirror, while at the same time providing automatic electronic compensation for any reduction in signal, which would be created by a decrease in the reflected light intensity from the mirror surface should contamination build up. Request a free brochure from Michell Instruments ...

Michell Instruments: contact details and other news
Email this article to a colleague
Register for the free Engineeringtalk email newsletter
Engineeringtalk Home Page

Search the Pro-Talk network of sites