Displacement sensors offer high resolution

Micro-Epsilon's capaNCDT sensor system uses a guard ring principle that enables earthing through the sensor rather than the target, which means the target does not have to be electrically grounded.

Micro-Epsilon UK has just launched a new range of noncontact, wear-free capacitive displacement measurement sensors, which offer extremely high-performance (resolution and speed), making them ideal for use within production plants for in-process quality assurance and other demanding industrial measurement applications.

Micro-Epsilon's capaNCDT sensor system uses a guard ring principle that enables earthing through the sensor rather than the target, which means the target does not have to be electrically grounded.

This means it is easier to install, especially on rotating or fast moving components.

Also, the customer only needs one sensor.

Some sensor manufacturers have to use two sensors - one on the top and one at the bottom of the target - to achieve this.

In addition, the sensor can be used to measure plastic sheets or film, although the plastic must have a stable and consistent electrical resistivity.

In fact, Micro-Epsilon has already supplied complete sensor systems to manufacturers of blown film, which measure to single micron accuracies at high speed.

The measurement output has a very high linearity, which means the user does not have to calibrate the sensor against the target when it is delivered from the factory.

If the customer has to replace a damaged sensor or plug in another sensor with a different measurement range, for RandD for example, the user can do this without having to re-calibrate or make any adjustments to the sensor electronics.

The capaNCDT sensors can be used to measure a variety of features and characteristics, including vibration; amplitude; clearance; run-out; displacement; distance or position; elongation; deflection; deformation; waviness, and tilt angle.

They can also be used for dimensional inspection, parts recognition, tolerance checking and sorting.

The capaNCDT (capacitive nonContact Displacement Transducer) 6300/6310 series is a compact, single-channel sensor system that comprises a capacitive displacement sensor, a sensor connecting cable and signal conditioning electronics.

For metals, the system is calibrated at Micro-Epsilon's factory and can then be used by the customer without any re-calibration or optimisation, which saves much time and potentially operator error.

The system is also user-configurable for customers measuring against insulating (nonmetallic) materials, using simple three-point linearisation, although a constant relative di-electric strength of the material is necessary for accurate measurement.

The new sensors exert no interference force on the target and operate independent of variations in the conductivity of electrically conductive (metals) target materials.

Changes in the conductivity of the target material do not affect sensitivity or linearity.

The sensors therefore offer high zero point stability and accuracy and operate virtually independent of temperature.

The capaNCDT 6300 comes with a preamplifier, which is integrated into the controller.

With the 6310 series, an external preamplifier is used, which enables cable extension of up to 20m.

CapaNCDT system electronics and sensor are protected to IP54 and the sensor can operate in ambient temperatures of between - 50C up to 200C.

Static (up to 2kHz) resolution is 0.1um for the CS10 sensor, down to 0.0005um for the S601 sensor.

Measuring range for metals is from 10mm down to 0.05mm and from 20mm down to 0.4mm for insulating materials.

The high-speed version of the sensor is the capaNCDT 6350, which offers advanced performance via an integrated DSP (digital signal processor).

The DSP achieves up to 50kHz (-3dB) bandwidth on analogue output.

Fast moving production and inspection environments involving difficult materials can be measured using the calibrated DSP.

Chris Jones, Managing Director at Micro-Epsilon UK comments: "The capacitive measurement principle is by far the most accurate and thermally stable method of noncontact measurement".

"Laser triangulation has become increasingly popular in recent years and claims to offer accuracies down to single microns".

"But when you introduce a nonideal surface (most metal or strip products) and a temperature deviation of just a few Celsius, laser sensors will deviate dramatically".

Jones continues: "Capacitive sensors from Micro-Epsilon do not suffer these types of 'real world' issues and quite often deliver sub-micron performance".

"The sensor measures over a defined surface area, which minimises errors due to surface roughness and the thermal drift is 100 to 200 times smaller than optical devices".

"Our task as application engineers is to educate the customer as to the correct sensor selection, based upon their application requirements".

"I feel that more knowledge is needed with regard to helping users to understand the key advantages of the capacitive sensor principle - something we at Micro-Epsilon are very happy to do".

The operating principle of the capaNCDT system is based on the 'ideal parallel plate' capacitor.

The two plate electrodes are formed by the sensor and the opposing target.

If an AC current with constant frequency flows through the sensor capacitor, the amplitude of the AC voltage on the sensor is proportional to the distance between the capacitor electrodes.

An adjustable compensating voltage is simultaneously generated in the amplifier electronics.

After demodulation of both AC voltages, the difference is amplified and output as an analogue signal.

Micro-Epsilon's capaNCDT system evaluates the reactance of the capacitor, which changes strictly in proportion to the distance.

This theoretical relationship is put into practice by constructing the sensors as "guard ring" capacitors.

Micro-Epsilon supplies capacitive displacement sensors to a wide variety of customers for a diverse range of applications.

Brake disc manufacturers, for example, require a very robust measuring principle to measure the deformation of the disc in extreme temperatures.

In one particular application for a customer, Micro-Epsilon's capaNCDT sensor is positioned only 2mm from the brake surface during measurement, with the temperature of the brake reaching 800C.

Capacitive sensors are also used extensively in the semiconductor and silicon wafer manufacturing industry.

Micro-Epsilon has worked closely with Carl Zeiss, for example, for ultra-precise lens alignment in silicon wafer processing.

Other applications include measuring the wear of bore holes in extruder machines or for the positioning of metal plate detectors used in large CAT scanner machines used in the medical sector.

Each CAT scanner has hundreds of small plates that are used to precisely position and read information.

These plates have to be positioned precisely, typically to within nanometre accuracy.

Measuring the run-out of air bearings is another ideal application for capacitive sensors.

Micro-Epsilon is working with manufacturers of air bearings to provide ultra-precise measurement of run-out of the bearing in hard disk drives.

As hard disks are being developed with even greater storage capacity, it is not acceptable for any kind of run-out of the disk.

Micro-Epsilon has therefore developed a special version of its capaNCDT sensor, which measures down to 0.1nm resolution.

Micro-Epsilon has also developed custom sensors, including credit-card sized electronics that help OEMs reduce installation size and cost of the system.

Micro-Epsilon's custom DT6019 capacitive sensor is a good example of this.

The company can custom design special sensing heads for OEM applications, where standard sensors are not ideal or just don't fit easily.

Back to top