Product category:
Stepper and Servo Drives, Motors, Controls
News Release from: MotionLink | Subject: Galil DMC-21x3
Edited by the Engineeringtalk Editorial
Team on 18 August 2005
Ethernet motion controllers are cost
effective
Galil's DMC-21x3 Ethernet motion controllers are a designed as cost effective solutions for space-sensitive applications.
Galil's DMC-21x3 Ethernet motion controllers are a designed as cost effective solutions for space-sensitive applications These intelligent, card-level controllers can be purchased with plug in multi-axis amplifier boards which eliminate wiring between controller and drives
Amplifier boards are available for driving stepper and brushed or brushless servomotors up to 500W.
Alternatively, the ICM-20100 breakout board can be used for easy connection of external drives.
The DMC-21x3 series is available with up to eight axes and can be configured for control of stepper or servomotors on any combination of axes.
Any mode of motion can be programmed including linear and circular interpolation, contouring,electronic gearing and e-cam.
All versions have Ethernet 10Base-T and 19.2Kbit/s RS232 connections.
• MotionLink: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
