Welding package covers many industries

The Murex Transweld Challenger 400 is designed for welding applications within general steel fabrication, the vehicle industry as well as household products and furniture manufacturers.

The Murex Transweld Challenger 400 welding package is designed for welding applications within general steel fabrication, the vehicle industry as well as household products and furniture manufacturers.

The package, which includes the Murex Transweld Challenger 400 power source, Murex Transmatic 4C wire feed units, a 5 metre connection set and welding torch, is featured in free technical literature.

Both Murex Transweld Challenger 400 and Murex Transmatic 4C are designed with a sturdy galvanised metal casing.

Electronically controlled feeding gives accurate and stable arc.

The four-wheel feed mechanism provides positive and stable feeding combined with low wear on the wire up to a wire diameter of 1.6mm.

The Transweld Challenger 400 is a step-controlled power source for MIG/MAG welding.

40 voltage steps provide accurate setting for even the most critical applications.

Wire feed speed, 2/4 stroke, inching, gas purge burnback time setting are made on the front panel of the feeder, giving a good overview of the settings.

Voltage setting and inductance adjustments are made on the power source.

Extra versatility is provided by the three wire feed mounting options, counterbalance and mast, wheel kit or a suspension bracket.

The Murex Transmatic 4C is designed to meet the most rigid safety standard IEC/EN60974-5 with low voltage (42V/AC) operations complete with an overload device ensuring the best possible protection.

Back to top