Product category:
Rotary Position, Tilt and Angular Sensors
News Release from: Macro Sensors | Subject: RS 1500-120
Edited by the Engineeringtalk Editorial
Team on 12 October 2007
Rotary position sensors measure
displacement
The RS 1500-120 measures the angular displacement of rotating elements such as quarter-turn ball and butterfly valves, air flow dampers and diverter gates.
Macro Sensors has released the RS 1500-120 series of fractional-turn contactless rotary position sensors for measuring the angular displacement of rotating elements such as quarter-turn ball and butterfly valves, air flow dampers and diverter gates used in packaging and postal sorting machinery Available as the RSE 1500-120 with a 24V DC input and a 0 to 10V DC output, or as the RSI 1500-120 with a two-wire 4-20mA loop-powered transmitter I/O, these units are adaptable to a wide variety of industrial automation and process control applications
This article was originally published on Engineeringtalk on 19 Feb 2003 at 8.00am (UK)
Related stories
LVDTs are drop-in alternatives
The PR 750 Series of general purpose LVDT position sensors are reliable and cost effective solutions for many position measurement applications.
Conditioner makes best use of space and power
The LVC-2402 is novel single-channel LVDT signal conditioner ideal for use in automation applications with PLCs and mini-PLCs.
Although their shafts can rotate a full 360, the RS 1500-120 rotary position sensors use contactless inductive technology to measure shaft angle position over a nominal range of 120 with excellent accuracy and repeatability and exceptional reliability.
These units exhibit a linearity error of less than 0.10% of full range output, have an IEC IP66 environmental rating and operate at temperatures from -20C to 85C.
It offers a servo-mount groove and pilot in the sensor body, convenient mounting flanges and splash-proof shaft seals.
There are no slip rings or rotors to wear out.
It can be connected either as a loop powered two-wire 4-20mA transmitter, or as a three-wire sourcing current transmitter using an external 24V DC loop power supply.
The voltage output version is a natural adjunct to PLC-controlled automation systems or PC-based data acquisition equipment.
The 4-20mA loop version supports all kinds of process applications with a low noise current loop output ideal for connection to the analogue input of a remote data logger, supervisory process controller or Scada system located some distance from the sensor or the measurement point.
• Macro Sensors: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page

