Mayr Transmissions web site, latest news and contact details

Address:
Valley Road Business Park
Keighley
BD21 4LZ
UK
Telephone: (UK) +44 1535 663900

Listing of all 32 news releases from Mayr Transmissions:

Clutches protect against machine tool collisions

When a collision occurs the torque increases so rapidly in modern machine tools that the electronic monitoring systems can no longer react in time.

News from Mayr Transmissions (27 February 2008)

Couplings save energy and steel

If Roba-DS disk pack couplings were to be used consistently in all relevant applications, approximately 600 tonnes less steel would be used in Germany every year.

News from Mayr Transmissions (27 February 2008)

Rigid couplings offer increased torque capacity

Roba - DS HT Couplings offer a higher torque capacity per size than competing designs, with hub bores to 110mm.

News from Mayr Transmissions (19 April 2007)

Torque sensor has torsionally rigid couplings

Mayr Antriebstrechnik has developed in co-operation with a respected manufacturer of torque sensing equipment, a new compact, contact less, torque sensor for both static and dynamic torques

News from Mayr Transmissions (14 December 2006)

Clutch promises constant control of torque

The Roba-contitorque offers the machinery manufacturer a clutch or brake unit for constant slip applications.

News from Mayr Transmissions ( 4 October 2006)

Couplings handle the torque of the paper industry

User application article Torsionally rigid couplings improve reliability on paper mill machine drives such as under floor pulpers and calender roll drives.

News from Mayr Transmissions (24 August 2006)

Clutches and couplings take strain in gear tests

User application article Compact overload clutches are combined with torsionally rigid couplings in automatic gearbox test rigs.

News from Mayr Transmissions ( 7 August 2006)

Torque from 10,500 to 260,000Nm covered

Flexible shaft couplings provide high torque capacities, low weight and compact overall dimensions.

News from Mayr Transmissions (22 May 2006)

Range extended with larger clutch

Larger clutch covers the torque range from 120 to 1200Nm on the ratcheting multi-position auto reset model and to 1500Nm on the single position synchronous auto reset type.

News from Mayr Transmissions (23 March 2006)

Torsionally rigid couplings handle higher torques

The Roba-DS coupling series meets the requirements of rotating plant and equipment manufacturers where maintenance-free high-performance torque transmission is required.

News from Mayr Transmissions (24 January 2006)

Friction-type torque limiters introduced

Mayr Antriebstechnik has introduced a series of friction-type torque limiters, which has been designed with end-users and power transmission distributors in mind.

News from Mayr Transmissions ( 4 November 2005)

Failsafe brake meets EN81-1 requirements

The Roba-stop-silenzio electromagnetic failsafe brake meets the EN81-1 specific requirements where a rising cabin must be braked in the event of an overspeed occurring.

News from Mayr Transmissions (13 October 2005)

Carbon fibre sleeves cut coupling weight

Roba-DS torsionally rigid shaft couplings are now available with carbon fibre sleeves for drive applications where weight, length and environmental conditions dictate.

News from Mayr Transmissions (23 August 2005)

Modular brakes add machine tool safety

An innovative series of modular safety brakes is designed for use in conjunction with vertical axis drives, specifically on machine tool applications.

News from Mayr Transmissions (30 June 2005)

Braking system increases machine safety

The Roba-linearstop is a novel braking system for use in conjunction with a linear drive or axially moving spindle.

News from Mayr Transmissions (20 April 2005)

Clutches cater for startup torque

Covering the torque range 4-2500Nm, EAS-Sp clutches are suitable for applications where a high startup torque together with a lower running torque are required.

News from Mayr Transmissions ( 8 March 2005)

Overload elements protect axial actuation

The Mayr EAS axial overload element, when built into a connecting rod or similar, can be preset to limit the axial force, in either tension or compression.

News from Mayr Transmissions ( 8 March 2005)

Torsionally rigid coupling with high torque

Mayr Transmissions has extended its Roba-DS Torsionally Rigid Coupling range with the addition of three new sizes of coupling.

News from Mayr Transmissions (10 November 2004)

Torque limiter with integral control device

Mayr has developed a torque limiter with the basic function of the ROBA - Slip Hub, together with an integral control device to limit the slip at a preset value.

News from Mayr Transmissions ( 8 November 2004)

Slip clutch brake provides manufacturer options

A new power transmission product from Mayr, the ROBA - contitorque Continuous Slip Clutch and Brake unit is claimed to offer the machine manufacturer a series of adjustable, reliable torque units.