Product category:
Gears, brakes, couplings and engines
News Release from: Mayr Transmissions | Subject: Roba-linearstop
Edited by the Engineeringtalk Editorial
Team on 20 April 2005
Braking system increases machine safety
The Roba-linearstop is a novel braking system for use in conjunction with a linear drive or axially moving spindle.
The Roba-linearstop is a novel braking system for use in conjunction with a linear drive or axially moving spindle Available in three sizes covering the force range 10-30kN, the Roba-linearstop is a fail safe spring applied unit which grips an axially moving rod or spindle
This article was originally published on Engineeringtalk on 21 Nov 2003 at 8.00am (UK)
Related stories
Putting the brake on linear motors
High-speed linear motors in CNC lathes reduce machining down time and maximise production efficiency, but high-performance brakes are crucial to their safe operation.
Release is via hydraulic pressure of between 70 and 160bar.
The Roba-linearstop attached to a machine will operate in conjunction with an axially moving spindle of 30 or 40mm diameter, at a maximum speed of 2m/s, offering backlash free, stepless, high performance braking.
Each unit is compact and being self adjusting, a typical operating life of 500,000 braking actions is possible.
Units are available with release monitoring, brake condition and integral emergency release if required.
The Roba-linearstop will increase machine reliability and safety and can easily be retrofitted into existing designs.
This new braking system offers the possibility of increased machine safety and reliability to existing machinery and plant.
• Mayr Transmissions: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
