Product category:
Industrialsafetytalk: Health and Safety Consultancy and Software
News Release from: National Physical Laboratory | Subject: Calibration service for radiation monitors
Edited by the Engineeringtalk Editorial
Team on 16 March 2007
NPL helps comply with new legislation
In April 2008, an EMF radiation safety directive to protect employees in the workplace will become law in the UK., for which the National Physical Laboratory is launching a unique calibration service.
Non-ionising radiation hazard monitors, used to assess health risks from radar installations, do not always provide accurate readings and can read up to ten times higher than they should when used The National Physical Laboratory (NPL) is launching a unique calibration service to help UK businesses comply with the directive by ensuring that hazard monitors provide consistent and accurate readings
This article was originally published on Engineeringtalk on 21 Aug 2008 at 8.00am (UK)
Related stories
Questions need to be asked on GCSE choices
Although this year's GCSE results are likely to show record grades, the IET is concerned that young people are not being encouraged to study triple or separate sciences.
Courses support boat building on the Solent
Courses cover a range of skills involved in the construction and maintenance of wooden and glass-fibre boats.
The Directive defines maximum levels for occupational exposure in terms of average and peak power densities.
Findings from a recent DTI funded RandD contract showed that many commercially available monitors are likely to read up to ten times higher than they should when calibrated using conventional methods and subsequently used to measure fields from radars.
The exact magnitude of the error depends on the pulse width and repetition frequency and for very low duty cycles the monitor can also read lower than it should.
Provided the pulse parameters are known NPL can provide corrections which could mean the difference between compliance and non-compliance with the Directive which is due to become law in the UK after April 2008.
The accuracy of risk assessments can be further degraded by continuously scanning radar beams.
NPL can provide additional corrections for the desensitisation factor of up to 100 that occurs when the monitor is illuminated only for short periods.
Typical peak power densities of 8 kW/m2 can be generated over the frequency range 2.5 to 18 GHz with pulse duty cycles from 0.05 to 4 per cent.
The new measurement service together with NPL's existing capabilities for continuous wave power flux density and field strength calibrations covering the frequency range 10 Hz to 45.5 GHz, provides a comprehensive measurement solution to meet the requirements of the new EMF Directive (2004/40/EC), the Low Voltage Directive (EN50366) and the EMC Directive (IEC 61000-4-3).
• National Physical Laboratory: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
