Visit the Norbar Torque Tools web site

Torque multiplier works deep under the sea

A Norbar Torque Tools product story
Edited by the Engineeringtalk editorial team Jun 10, 2008

The gear unit has been designed as an adapter for torque tools used on subsea Christmas trees - the assemblies of control valves, gauges and chokes that control oil and gas flow at a well head.

Norbar Torque Tools has developed a torque multiplier for the subsea tools market.

Designed as an adapter to allow API 17D Class 4 intervention torque tools to generate the torque required to handle Class 7 applications, the new torque multiplier delivers high accuracy and increased flexibility and can be configured in two standard lengths.

The gear unit has been designed as an adapter for torque tools used on subsea Christmas trees - the assemblies of control valves, gauges and chokes that control oil and gas flow at a well head.

Installed on the ocean floor at depths of up to 3000m, these 'wet trees' provide the ultimate challenge for the torque tools designed to actuate the various valves.

The valves come in various sizes with different torque requirements, with the typically used subsea products ranging from Class 1 valves with maximum torques of 68Nm up to Class 7 with torques of 34,000Nm.

Clearly it would be impractical to hold different tools for each valve, or to standardise on the largest tool on the off-chance of having to accommodate a Class 7 valve occasionally.

The gear adapter has become popular as a means of extending a Class 4 tool (which would generate up to 2700Nm of torque) up to Class 7.

To date, the trade-off for this added convenience has been accuracy, with extended Class 4 tools failing to offer the precise torques of dedicated Class 7 tools.

Norbar's design has overcome this problem, enabling a Class 7 torque output to be generated from a Class 4 torque input to an accuracy of better than +/-5%.

"Our Norwegian customer came to us to see if we thought we could improve on the existing designs", says Norbar's Tim Bloor.

"We looked at the problems with the existing products and went back to basics".

"The result was two prototype units that we believe deliver far greater accuracy than the current gear adapters on the market".

The function of the gear is to operate as a torque multiplier, but the ratios have to be exactly right to achieve the correct torque and the specified speed from the Class 4 tool.

At the same time, the gear has to be able to function reliably in a subsea environment at extreme temperatures and pressures.

It also has to be easy to handle.

Norbar was able to meet all of these requirements.

Inherent gearbox inefficiencies mean that the number of turns that the input has to make to achieve one revolution of the output is not the same as the torque multiplication ratio.

A key aspect of the design, then, was to engineer each gear stage to give an exact velocity ratio which would deliver the required torque multiplication at an accuracy of better than +/-5%.

The company's torque multiplier is designed to withstand corrosive environments and is pressure-compensated to allow operation at typical subsea pressures.

It is designed to be suitable for use with the standard Class 4 torque tools that, operated by ROVs, are used to remotely actuate the wet valves.

There is also a restriction on the weight that ROVs can manipulate, so considerable design work has gone in to keeping the tool weight down to an acceptable level.

The design recognises that there are two standard tool lengths in general use, with different companies preferring either one or the other.

With the Norbar design, the nominal length can be quickly changed from short to long by adding or removing an adjustment shaft under the adapter sleeve.

The result is a tool that is highly versatile.

Other features include a lifting handle that makes the tool as easy as possible to manoeuvre.

The new torque multiplier is currently under test with Norbar's Norwegian customer serving the North Sea Oil market.

Find out more about this article. Request a brochure, download technical specifications and request samples here.
Send to a friend Send to a friend
Print this page Print this page
Bookmark this page Bookmark this page

Not what you're looking for? Search the site.

Back to top Back to top

Find out more about this article or product Arrow

Contact Norbar Torque Tools

Contact Norbar Torque Tools

Tel +44 1295 270333

Visit Norbar Torque Tools website

Other Norbar Torque Tools stories

Contact Norbar Torque Tools

More stories More stories

Newsletter sign up

Request your free weekly copy of the Engineeringtalk email newsletter ...

Sign up now Sign up now

Visit the Norbar Torque Tools web site

Browse by category

All suppliers A - Z

A Pro-talk Publication

A Pro-talk publication