Product category:
Seals
News Release from: Novus Sealing | Subject: Camprofile gaskets
Edited by the Engineeringtalk Editorial
Team on 06 November 2006
Gaskets are specified for reliability
Novus Sealing has continued an investment programme that ensures that Camprofile gaskets are manufactured to the highest standards.
Several recent incidents where Camprofile gaskets have caused leaks are the result of poor quality and manufacturing errors An increasing number of such joint failures have been referred to Novus Sealing for independent technical evaluation and the results are both surprising and potentially hazardous
This article was originally published on Engineeringtalk on 15 May 2006 at 8.00am (UK)
Related stories
Programme aims eliminate leakage
A comprehensive exchanger programme aims eliminate leakage from heat exchanger and pressure vessel flanges by addressing every aspect that contributes to the leak.
Gaskets ensure leak-free vessel performance
An increase in the report of gasket failures has prompted Novus Sealing to raise a concerned voice over the need place quality before price.
Dr Gavin Smith leads the Novus Sealing Technical Team.
"We have been shocked to find that Camprofile gaskets are supplied with so little regard to quality and the very arduous service conditions in which they have to operate", says Dr Smith.
"We have found instances where welding and grinding operations have left the gasket with no chance of sealing and every possibility of creating a major incident".
Novus Sealing has continued an investment programme that ensures that Camprofile gaskets are manufactured to the highest standards.
The unique production process ensures that customers can enjoy gaskets up to 3m in diameter without welds contrasting dramatically to gaskets containing as many as eight welds in a diameter of less than 1.5m.
Where welding is necessary at above 3m the alignment and height of the gasket "cams" are the same as the surrounding material, only possible through investment in special equipment and expertise.
Novus applies the same quality to the facing material.
The most common facing material is graphite and Novus will only use high quality European sourced material from SGL.
Research has shown that Chinese origin graphite materials consistently oxidise faster and at lower temperatures and in some cases high sulphur contents can cause metal corrosion, all factors that can rapidly compromise gasket integrity.
Novus Sealing Camprofile gaskets are tested and approved by Chevron Texaco, Dow, Huntsman Chemicals and Exxonmobil, and in many cases the Novus product is specified exclusively for complete reliability and process integrity.
• Novus Sealing: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page


