Product category:
Machine Safety Monitoring and Control
News Release from: OEM Automatic | Subject: Duelco NST2005
Edited by the Engineeringtalk Editorial
Team on 19 August 2002
Fuller features for DIN-rail safety
relay
The new NST2005 category 4 safety relay from Duelco offers a large number of features yet is housed in a compact 22.5mm wide DIN rail mountable enclosure.
The new NST2005 category 4 safety relay from Duelco offers a large number of features yet is housed in a compact 22.5mm wide DIN rail mountable enclosure Whereas some manufacturers have managed to fit their relays into such a housing at the expense of outputs or other features, the NST2005 maintains the standard of three normally open safety contacts and one auxiliary output for direct connection to a PLC
This article was originally published on Engineeringtalk on 14 Apr 2000 at 8.00am (UK)
Related stories
'Ex' proof signals from J Auer
OEM Automatic has launched a range of optical and acoustic signals for use in hazardous areas.
Two channel inputs from E-stop circuits, gate switches, safety mats or light guards are supported and the reset circuit may be configured for either automatic or monitored manual operation.
Wiring is kept to a minimum by utilising internal jumpers to configure the relay allowing single or two channel operation, a number of reset options and the choice of auxiliary output to be easily set.
A current limited output means that safety mats and gate switches can be safety used.
Finally, options are available in both 24V AC/DC and 48-240V AC supply, with either fixed or detachable screw terminals.
• OEM Automatic: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
