Pressure sensor allows easy integration

Edited by the Engineeringtalk editorial team May 16, 2007

The SC400 Tecsis pressure sensor offers a full stainless steel construction, a display and pressure connection that can rotate 330 degrees

OEM Automatic's SC400 Tecsis pressure sensor is available in two models.

The 3137 offers two switched outputs and the 3138 has one switched output and either a 4-20mA or 0-10v signal.

Both models benefit from full stainless steel construction, a display and pressure connection that can rotate 330 degrees, allowing maximum visibility, a wide choice of vacuum, compound and pressure ranges that can be selected to read in bar or psi and are password protected for security.

There are two types of sensing elements, a ceramic cell for 1-50bar measurements and a stainless steel thin film element for 0-100/0-700bar.

Switching currents range from a few uA to 0.5A, allowing switches to be integrated into almost any control system.

The electrical input is supplied via an M12x1 connection giving an IP65 rating.

Set point adjustment can easily be made on site, either with or without the pressure applied and without the need for external software, the 4-digit LED display indicates the current reading and switch status.

Further features include min/max memory and adjustable time delay on switched output.