Product category:
Data acquisition Software and Communications
News Release from: Omniflex (UK) | Subject: Omniterm TXB
Edited by the Engineeringtalk Editorial
Team on 23 September 2003
Transmitter has universal appeal
The Omniterm TXB universal four-wire transmitter is designed for the widest range of signal conditioning applications in a single off-the-shelf product.
The Omniterm TXB universal four-wire transmitter is designed for the widest range of signal conditioning applications in a single off-the-shelf product, using advanced state-of-the-art digital measurement techniques, combined with extremely user friendly software configurability The input accommodates most thermocouple and resistance bulb types, as well as voltages and currents from 1mV minimum to 10V DC maximum input span
This article was originally published on Engineeringtalk on 24 Apr 2007 at 8.00am (UK)
Related stories
Web-based system disseminates data
Widely distributed company assets can be view at a single website by authorised users from any remote location.
Annunciator comes with hardwired inputs
Omniflex has equipped the Annunciator range with both hardwired inputs and Modbus serial Interface boards.
An extended range up to 60V DC input is also available.
The output can be configured for unipolar or bipolar outputs of current or voltage from 1 to 20mA or 1 to 10V.
Full isolation (input/output/power supply) to 1500V AC ensures trouble-free accurate measurement under the harshest plant conditions.
This product provides extremely low life-cycle costs by reducing spares stock-holding requirements, and reducing specialist technical expertise required for field support and calibration, module replacement and field configuration.
This new holistic approach to instrumentation asset management ensures reliable performance and minimal down time.
The TXB offers 0,01% resolution with increased dynamic range, tailored for noisy plant environments.
The powerful but intuitive configuration software ensures the maximum instrument flexibility with reliable configuration management to ensure all instruments on the plant are always correctly configured to the design requirements specification.
This product has been designed with high reliability applications in mind.
The output stage has built in overload indication to detect overloaded output circuits - whether from a wire break or just excess resistance in the line.
Omniterm TxB has been designed to meet the criteria of IEC61508 for SIL1 applications allowing for integration into safety systems.
• Omniflex (UK): contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
