Product category:
CAM, CNC and production management software
News Release from: Open Mind (Learning/HR) | Subject: 5-axis CNC milling software modules
Edited by the Engineeringtalk Editorial
Team on 22 August 2000
Software for 5-axis interpolative
metalcutting
Making its UK debut at CIM 2000 will be a software module developed by Open Mind for full 5-axis CNC milling using its hyperMILL and hyperFORM computer-aided manufacturing (CAM) products.
Making its UK debut at CIM 2000 will be a software module developed by Open Mind for full 5-axis CNC milling using its hyperMILL and hyperFORM computer-aided manufacturing (CAM) products Suitable for mould and die, turbine blade and aerospace machining, the new modules are easy to use, provide rapid program generation, exhibit high levels of process reliability and offer improved as-machined surface quality
This article was originally published on Engineeringtalk on 31 Jul 2000 at 8.00am (UK)
Related stories
CAM software cuts mould production time
Using Hypermill CAM software from Open Mind, mould manufacturer Fylde Precision Toolmakers has reduced dramatically the time to generate programs for high speed metalcutting of injection moulds
More modules improve CAM software
A series of software modules developed by Open Mind for five-axis CNC milling using its Hypermill and Hyperform products represents a major step forward in computer-aided manufacturing (CAM).
Before embarking on the development, the company identified shortcomings in existing software from other vendors, in particular the inability of most to support reliable automatic collision checking.
This in turn led to problems in applying 5-axis machining to deep cavity work where it has much to offer.
As a result, a high proportion of such work within manufacturing industry tended to use three interpolative and two positional axes to machine discrete features rather than the component in its entirety.
Open Mind collaborated with the Fraunhofer Institut in Germany to develop a more complete solution to 5-axis program generation.
It is based on a patented mathematical model which uses leading curves which define the inclination of the tool and therefore the machining axis position.
Further reading
Latest CAM system handles all data formats
Ability to import all electronic data formats via standard interfaces is a key feature of Open Mind's new Hyperform V5 CAM system, developed specifically for the mould and toolmaking sector.
Millennium Angel made with high-tech CAM approach
Computer-aided manufacturing (CAM) software company, Open Mind, has assisted in creating a two metre high representation of Icarus, called the Millennium Angel.
PC-based CADCAM proves a winner for toolmaker
BEC, which produces mainly plastic injection moulds as well as some die cast tools, is convinced that it took the right decision when investing in a new CAD/CAM system
By comparing the leading curve against the polyhedral surface model of the component, it is possible to detect whether the tool and its holder will collide with the surface.
The need for external simulation is therefore eliminated and programming time is minimised.
Likewise, the program can utilise all of the machining axes to optimise cutting conditions so the run time of the machining program is reduced.
Ability to import all electronic data formats via standard interfaces is a key feature of Open Mind's new hyperFORM V5 computer-aided manufacturing CAM system, developed specifically for the mould and toolmaking sector.
Many data exchange formats are included such as IGES, STEP, DXF and VDA, and there is the option of a direct CATIA interface.
Users with a multi-client customer base will therefore have no problem in handling computer-aided design (CAD) models presented in a variety of formats.
With the introduction of this stand-alone product, which spans simple 2.5D pocket milling and drilling through to full simultaneous 5-axis work, Open Mind is now primarily focused on the mould, tool and die market.
It is emerging as one of the leaders in the field, according to the US research organisation, CIMdata, in its 1999 industry report.
The privately owned, German company was the fastest-growing CAM software vendor in Europe during 1998 and 1999.
Last year, revenues grew by about 35 per cent over the previous year to in excess of US$15 million.
The rationale behind hyperFORM is that many toolmakers do not want to provide a design service, choosing instead to import component data in electronic form from its customers.
Graphical exchange is normally required but invariably the models do not translate cleanly.
Toolmakers which find themselves in this position are looking for a powerful, stand-alone CAM system married to basic CAD functions for performing limited operations on the imported model, such as surface functionality for closing gaps between surfaces, creation of boundaries and surface trimming.
This minimises the need to shuttle between CAD and CAM when preparing the imported model for machining.
Milling strategies available within hyperFORM include Z-level roughing and finishing (waterlining), milling along leading curves, slope machining and fully automatic rest machining.
High speed functions include 3D equidistant finishing, HSC loops for finishing applications and automatic pencil milling.
Tool paths can be viewed using the hyperVIEW simulation package and post processors are available to suit the majority of CNC systems.
Open Mind's core product, hyperMILL, will be demonstrated at CIM 2000 in three new versions, all of which are embedded in their respective CAD systems.
One is hyperMILL for CATIA V6.6, the de-facto standard design system for the aerospace industry, incorporating enhanced functionality as yet to be announced.
There will also be two improved CAM packages for Autodesk CAD products, one being hyperMILL V5.2 for the latest release of Autodesk Mechanical Desktop - V5.0 - again with the emphasis very much on mould and die making.
It offers improved machining strategies, more flexible job listing, an integrated simulation module and HTML-based help.
The other version of hyperMILL will be a preview release.
Based on new methodology, it is for integration into the new feature-based, solid-modelling system, Autodesk Inventor.
The package will introduce Open Mind's Adaptive Machining Technology which automatically checks the features of the model and rearranges them into manufacturing features and then in turn into cutter paths for machining.
Full associativity is provided between the model and the cutter paths to create a family of similar parts just by changing the model and saving it under another name.
Revised cutter paths are calculated automatically according to the changed model.
Whereas the above Open Mind products are for metalcutting applications, principally milling and drilling, the company will also show its hyperCUT CAM package designed to speed programming of 2-axis and 4-axis wire-cut electric discharge machining (EDM) equipment.
It is a high-end system which contains a wealth of spark erosion 'knowledge', allowing novice as well as experienced users to gain the maximum advantage from its use.
The company hopes to have a new version of this software on display.
• Open Mind (Learning/HR): contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
