Product category:
Machinery and Production Equipment
News Release from: Orbimatic | Subject: Orbimatic
Edited by the Engineeringtalk Editorial
Team on 28 February 2003
Orbital welding helps reduce defect
rates
A major manufacturer of equipment for the production of electronic components has help increase efficiency of its production tooling by using an Orbimatic orbital welding system.
A major manufacturer of equipment for the production of electronic components has help increase efficiency of its production tooling by using an Orbimatic orbital welding system The Orbimatic system is used for the production of high purity gas distribution panels
This article was originally published on Engineeringtalk on 4 Oct 2002 at 8.00am (UK)
Related stories
Tools get to grips with tubes and pipes
Orbimatic is now offering the Otto Tools range of tube and pipe cutting, facing and preparation equipment.
Because of the small dimensions of the equipment it can be used for even the smallest configurations of pipe work.
The Orbimatic system gives a true data log file for each and every weld performed during production, the log files does not just suggest that the weld is performed as per the programmed parameters but give exact deviation of weld parameters to two decimal places.
These log files make any defective welds easily identifiable and this in turn gives a guarantee that each and every weld is performed as it should be.
And as the machine also incorporates an oxygen analyser the internal quality can also be guaranteed.
This Orbimatic system has helped bring down the reject rate of the products produced by the equipment, by helping reduce the amount of contaminants which come into contact with the gas during the manufacturing process.
• Orbimatic: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
