Welding lathe aims for smaller components

The Varioturn RS 80-1R precision welding lathe is designed specifically for welding small thin wall circular components.

The Varioturn RS 80-1R precision welding lathe is designed specifically for welding small thin wall circular components.

The Varioturn has both torch carriage and headstock on linear carriages and are easily adjustable and can be locked into position with a pneumatic lock system.

A 300mm faceplate is standard for attachment of tooling of a suitable chuck.

The torch carriage incorporates a pneumatic torch retract mechanism with a range of 150mm.

The torch can also be precisely adjusted with an x-y slide mechanism.

The torch can also be tilted by up to 40 degrees.

The tailstock has a pneumatic advance for easy loading and unloading of components.

The lathe is equipped with a cold wire feeder, consisting of drive unit, wire guide and micro-adjustable of the wire feed nozzle.

The standard Varioturn can accommodate components of up to 1000mm in length and 400mm in diameter.

It will handle loads of 80kg at 100mm from the head stock and 40kg at the tailstock.

The Varioturn can be controlled by the Orbimat C range of power supplies which will ensure a consistent current and rotation speed.

Back to top