Oxygen analyser monitors weld quality

The ORB1000 oxygen analyser is used to ensure the internal purge of a tube is pure before welding can commence.

The ORB1000 oxygen analyser is used to ensure the internal purge of a tube is pure before welding can commence.

The ORB1000 is supplied in a robust ABS case which houses the main unit and all accessories, and interfaces directly into the Orbimat C range of orbital welding power supplies with no additional interfacing required.

The unit uses a long-life heated zirconium sensor which a life expectancy of at least five years.

The easy-to-use menu driven software makes operation of this unit a welder's dream.

An audible alarm is also included to alert the welder should the oxygen level of the internal purge rise during the welding cycle.

The unit will measure down to 1ppm and is calibrated down to 10ppm and starts measuring at around 0.1%.

The sensor reacts instantly to change in oxygen levels, and its display shows the changing level instantaneously.

As well as being used with the Orbimat C orbital welding power supplies the unit can be used as a stand-alone unit for connection to welding systems or enclosures.

Back to top