Product category:
Machinery and Production Equipment
News Release from: PennEngineering | Subject: Pemserter on DVD
Edited by the Engineeringtalk Editorial
Team on 14 August 2006
Fastener feeding system shows up on DVD
A new free DVD now available from PennEngineering profiles the Pemserter in-die fastener feeding system.
A new free DVD now available from PennEngineering profiles the Pemserter in-die fastener feeding system This portable equipment enables self-clinching nuts, studs, and standoffs to be installed in assemblies during the stamping process
This article was originally published on Engineeringtalk on 9 Nov 2001 at 8.00am (UK)
Related stories
Increased production rates from fastener press
The mid-range Pemserter Tech2t automatic press for installing self-clinching fasteners offers increased production rates and improved insertion quality
Working in tandem with a stamping press (and properly tooled die) to feed and install fasteners, the system eliminates secondary operations typically required for fastener insertions and can boost productivity.
The four-minute DVD covers key features of the system, including fastener feeder; quick-change die tools; online installation verification using sophisticated sensors; and controls.
The Pemserter in-die fastener feeding system is virtually "plug and play" by using multipin twist lock connectors to interface with the die and stamping press.
The system can be configured for multiple or single insertions, generally matching the rate of the stamping press.
A compatible Plus module can expand operations.
The DVD shows operators easily guided by a touch-screen (for set-up and operation) and an online library of fault/help screens.
Removable tooling handles complex workpieces and offers considerable adaptability capable of reaching into areas generally considered inaccessible.
• PennEngineering: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
