Product category:
Adhesives, threadlockers and other consumables
News Release from: Bondmaster | Subject: Bondmaster E04
Edited by the Engineeringtalk Editorial
Team on 12 June 2002
Epoxy protects motor wires
Bondmaster E04 is an epoxy adhesive designed to protect wire from breakages and wear around the commutators in high-impact, high-temperature, high-speed and high-vibration rotor applications.
Bondmaster E04 is an epoxy adhesive designed to protect wire from breakages and wear around the commutators in high-impact, high-temperature, high-speed and high-vibration rotor applications This two-part epoxy can be applied direct online prior to the preheat oven during the trickle-coat resin process
This article was originally published on Engineeringtalk on 26 Feb 2001 at 8.00am (UK)
Related stories
Structural adhesives operate at up to 200C
Bondmaster has a range of single and two-part structural adhesives that is capable of operating at continuous temperatures of up to 200C.
Full cure will occur in the preheat oven prior to the trickle coating process.
This process removes the need for offline UV curable processes, banding, shrink-wrapping and other methods currently being used to protect wires from wear and breakage.
Bondmaster E04 is a 1:1 mix ratio epoxy with a work life of 45min and an instant cure through the preheat oven in most trickle varnish systems.
This material is suitable for Class H motors up to 180C.
A simple 1:1 extruder can be used to apply the material online.
Bondmaster E04 is available in several sizes including 50, 200 and 400ml cartridges, and 5 and 19 litre pails.
• Bondmaster: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
