Product category:
Stepper and Servo Drives, Motors, Controls
News Release from: Parker Hannifin - Electromechanical and Drives Division | Subject: ViX Microstep
Edited by the Engineeringtalk Editorial
Team on 21 May 2003
All-digital stepper boosts machine
throughput
The ViX Microstep is a motion control building block that can boost automation throughput while simultaneously reducing system size and cost.
Parker Hannifin's Electromechanical Division has extended its award-winning ViX product range with an all-digital, intelligent, microstepping motor drive The ViX Microstep packs an advanced motion controller with either a 250 or 500VA power amplifier into an ultracompact case - providing a building block that can boost automation throughput while simultaneously reducing system size and cost
This article was originally published on Engineeringtalk on 4 Sep 2008 at 8.00am (UK)
Related stories
Torque motors to replace gearbox mechanisms
The TMW series torque motors from Parker Hannifin are designed to help end users of heavy duty industrial machinery replace traditional gearbox mechanisms with an efficient direct drive system.
Parker announces X-Mill manufacturing solution
Parker's Electromechanical Automation Division has announced the X-Mill as a manufacturing solution, expanding its long-travel-positioner manufacturing capabilities.
The raw performance of the power stage is intelligently controlled using innovative new digital signal processing techniques developed by Parker.
Advanced field-orientated control (FOC) is applied to the digital current loop to enhance the torque-speed envelope.
This has the effect of eliminating 'midrange instability', and reducing torque ripple - leading to improved low-speed smoothness.
Furthermore, Parker's innovative 'intelligent damping' control typically reduces settling time by up to a factor of four - significantly enhancing throughput for precision equipment OEMs.
ViX Microstep drives are packaged in the same exceptionally compact book-style housing as the ViX servo drive - measuring just 125 x 42 x 85mm - for direct panel mounting, or attachment to a standard DIN rail using an optional adapter.
Further reading
Planetary gearheads promise longer life
Gearheads provide performance enhancements that include higher radial load capacities and increased service life resulting from the incorporation of more robust bearing support.
Motion controllers offer PowerLink communication
The compact ACR9040 is capable of controlling 16 axes of servo drive via the Ethernet PowerLink network, with interpolation of up to eight axes in any combination.
Linear motors ease wire damper test setup
Spacer dampers protect the cables from wear and premature fatigue failures, maintaining electrical and mechanical performance during onerous climatic extremes and system faults.
The drive is available with a choice of 2.8 or 5.6A RMS output current ratings, and accommodates motor bus voltages up to 80V DC.
To ensure smooth operation at all times, the power stage operates at its full 51,200 step per revolution resolution regardless of the actual steps per revolution programmed by users.
Moreover, the user resolution is freely programmable in the range from 400 to 51,200 step/rev, allowing the motion system to be matched precisely to the mechanics, even where there is an odd transmission ratio or leadscrew pitch.
ViX Microstep drives can be commanded directly from a PC, a centralised control system generating industry-standard step-direction signals, or optionally a fieldbus system.
In addition, ViX Microstep drives will operate autonomously using motion control programs stored within their powerful built-in controller - these may be executed in response to external events, or signals from a host controller such as a PLC.
The built-in controller uses Parker's well-proven Easi command language, and supports all standard motion control functions.
In addition, a number of advanced functions such as electronic gearing, registration, closed-loop position maintenance and stall detection are offered.
The controller is equipped with an RS232C interface as standard, and optionally a fieldbus interface for CANopen and RS485 communications.
Standard I/O facilities include five digital inputs and three digital outputs, all of which offer software-configurable termination characteristics and 5 or 24V operation.
Rapid system configuration and programming of ViX Microstep drives is achieved by using Parker's Easi front-end software package.
This powerful Windows-based software tool makes extensive use of guided-wizards and simple hierarchically structured pull-down menus to simplify configuration and programming.
When the drives are used with Parker stepper motors, users only need to select the motor from a menu to define the entire configuration; all set-up information is retrieved automatically from a built-in database, which includes the facility to add additional motors from other vendors.
The drive automatically optimises FOC control according to motor parameters that are entered either directly, or through selecting the appropriate motor model using Easi software.
This enables a wide range of motors to be accommodated without compromising performance.
The result is unsurpassed torque/speed performance, smooth and resonant-free operation at low speed, reduced torque ripple and significantly reduced settling times - permitting increased production throughput - together with improved efficiency and quieter operation.
ViX Microstep drives complement Parker's existing range of ViX servo drives and accessories.
By providing a drive range with a common programming language, front-end tools and compact book-style package, Parker helps OEMs to minimise systems costs when configuring multi-axis automation, and creating machinery ranges. Request a free brochure from Parker Hannifin - Electromechanical and Drives Division ...
• Parker Hannifin - Electromechanical and Drives Division: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
